Description
The NCE 5240207 UTP Panel Cab Bus Fascia Panel w/RJ12 Plugs is the UTP — NCE's lowest-cost, easiest cab bus fascia panel. Four RJ12 jacks in parallel, plus a 12 V boost input for long-cable runs.
What it does: Drop one of these into the fascia anywhere on the layout and you've got four plug-and-play cab bus connection points for handheld throttles. All four RJ-12 jacks are wired in parallel — no internal logic. For long cable runs (over 40 ft) a 2.5 mm / 5.5 mm 12 V DC 'wall wart' (P114 or similar) plugs into the rear to boost cab bus power.
- Jacks: 4 × RJ12 in parallel
- Boost input: 2.5 mm / 5.5 mm DC barrel (12 V, for long-run installs over 40 ft)
- Track power: Not provided (cab bus only)
- NCE part: 5240207 (Walthers 524-207)
Tip: Pair multiple UTPs around the layout for proper walkaround operation — plug your Pro Cab / Cab06 into the nearest one as you walk.
About NCE: NCE Corporation (USA) — a leading manufacturer of NMRA-compliant DCC systems, mobile decoders, accessory decoders, and automation electronics. NCE products are renowned for the Pro Cab and Power Cab throttles, the rugged D-series mobile decoders (D13 / D408 / D16), the Switch-It / Switch8 / Snap-It family of accessory decoders for stationary turnout control, the BD20 block detector, and a full cab bus / booster / circuit-breaker ecosystem. Most NCE products are also fully compatible with other NMRA DCC systems.
In stock at Oakville Model Trains Depot.