{"title":"N Track \u0026 Turnouts","description":"\u003cp\u003e\u003ca href=\"\/collections\/track\"\u003eTrack\u003c\/a\u003e choice in \u003ca href=\"\/collections\/n-scale\"\u003eN scale\u003c\/a\u003e comes down to two systems: \u003ca href=\"\/collections\/atlas\"\u003eAtlas\u003c\/a\u003e code 80 (the workhorse — durable, forgiving with older flanges, and the most common choice for new layouts) and \u003ca href=\"\/collections\/peco\"\u003ePeco\u003c\/a\u003e code 80 \/ code 55 (the finescale option — narrower rail profile, better look, plus the famous Peco electrofrog turnouts). Our N Track \u0026amp; Turnouts collection stocks both, plus \u003ca href=\"\/collections\/kato\"\u003eKato\u003c\/a\u003e N Unitrack for plug-and-play building.\u003c\/p\u003e\u003cp\u003eTurnouts cover #4 Custom Line right- and left-hand from Atlas, Peco large-radius and curved double-radius electrofrog turnouts in code 80 and code 55, plus uncouplers, rail joiners (both nickel silver and insulated), wooden ties, code 80 Super-Flex track in 29.5\" lengths, and starter sets that get a new layout running quickly.\u003c\/p\u003e\u003cp\u003eNeed ballast and roadbed sized for N? See \u003ca href=\"\/collections\/woodland-scenics\"\u003eWoodland Scenics\u003c\/a\u003e fine ballast and N-profile foam roadbed in our \u003ca href=\"\/collections\/ballast-and-roadbed\"\u003eBallast \u0026amp; Roadbed\u003c\/a\u003e collection. Need to wire turnouts? See \u003ca href=\"\/collections\/dcc-electronics\"\u003eDCC \u0026amp; Electronics\u003c\/a\u003e. Ships from Oakville, Ontario. Free shipping on orders over $250. Contact us for special orders.\u003c\/p\u003e","products":[{"product_id":"atlas-trains-2700-n-scale-code-80-remote-standard-line-left-hand-switch-new","title":"Atlas 2700 N Scale Trains Code 80 Remote Standard Line Left-Hand Switch","description":"\u003cp\u003eThe Atlas Standard-Line remote turnout is the workhorse of N-scale layout building — affordable, reliable, and instantly switchable from a control panel. The #2700 is the left-hand version, with a built-in solenoid switch machine integrated into the tie strip.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWire the three machine leads (one common, two directional) to an Atlas #56 Controller or any momentary push-button setup providing a brief pulse of AC.\u003c\/li\u003e\n\u003cli\u003ePower the switch machine from an AC accessory tap (12-16V AC) — do not use continuous DC.\u003c\/li\u003e\n\u003cli\u003eCompatible with all N-scale Code 80 track from Atlas (Standard-Line, Custom-Line, True-Track).\u003c\/li\u003e\n\u003cli\u003ePair with the right-hand version #2701 for facing-point yard ladders.\u003c\/li\u003e\n\u003cli\u003eFor under-the-table switch machines instead, use Atlas’s Code 80 manual turnouts (#2702\/#2703) with Tortoise or similar.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standard-Line turnout with built-in remote solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2700\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45070856716470,"sku":"150-2700","price":34.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3a8d33e1-74bf-4f8d-ac62-9129634c71ce.jpg?v=1776736954"},{"product_id":"atlas-trains-2701-n-scale-code-80-remote-standard-line-right-hand-switch-new","title":"Atlas 2701 N Scale Trains Code 80 Remote Standard Line Right-Hand Switch","description":"\u003cp\u003eThe right-hand companion to the #2700. Atlas’s N-scale Code 80 Standard-Line remote turnout includes a built-in solenoid switch machine right in the tie strip — no separate switch motor or under-table wiring required for basic operation.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWire to an Atlas #56 Controller (or any momentary push-button) on a 12-16V AC accessory tap.\u003c\/li\u003e\n\u003cli\u003eDo not feed the solenoid with continuous DC — pulse only.\u003c\/li\u003e\n\u003cli\u003eCompatible with all N Code 80 track (Atlas, KATO Unitrack with transition adapters, etc.).\u003c\/li\u003e\n\u003cli\u003ePair with #2700 (left-hand) for symmetrical yard ladders or wyes.\u003c\/li\u003e\n\u003cli\u003eFor an under-the-table switch-machine installation, choose Atlas’s manual turnouts (#2702\/#2703) instead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standard-Line turnout with built-in remote solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2701\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45070856880310,"sku":"150-2701","price":34.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_86fb296d-7fb2-43f4-8e40-205cbc290fcd.jpg?v=1776736957"},{"product_id":"atlas-2702-n-scale-code-80-nickel-silver-left-hand-lh-manual-turnout-switch","title":"Atlas 2702 N Scale Code 80 Nickel Silver Left-Hand Manual Turnout Switch","description":"\u003cp\u003eThe Atlas N Code 80 manual turnout is the clean, low-profile choice for layouts where you want to throw switches by hand — ideal for branch lines, industrial spurs, or any spot where you don’t need a control-panel switch. The #2702 is the left-hand version.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThrow the included ground-throw lever by hand to align the points.\u003c\/li\u003e\n\u003cli\u003eTo motorize later, replace the ground-throw with a Tortoise or Atlas Snap Switch and wire the controller of your choice.\u003c\/li\u003e\n\u003cli\u003eConnects to any N Code 80 track with standard rail joiners.\u003c\/li\u003e\n\u003cli\u003ePair with the right-hand #2703 for paired facing-point ladders or crossover assemblies.\u003c\/li\u003e\n\u003cli\u003eNickel silver rail ensures reliable electrical conductivity and easy cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Manual turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel silver rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2702\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45070857076918,"sku":"150-2702","price":27.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_37501588-d4e9-4052-ace7-207b449eb417.jpg?v=1776736960"},{"product_id":"atlas-2703-n-scale-code-80-nickel-silver-right-hand-rh-manual-turnout-switch","title":"Atlas 2703 N Scale Code 80 Nickel Silver Right-Hand Manual Turnout Switch","description":"\u003cp\u003eThe right-hand companion to the #2702. Atlas’s N Code 80 manual turnout is a clean, low-profile choice for hand-thrown branch lines, sidings, and industrial spurs where you don’t need a powered switch machine.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse the included ground-throw lever to align the points by hand.\u003c\/li\u003e\n\u003cli\u003eEasily motorized later with a Tortoise machine or Atlas Snap Switch.\u003c\/li\u003e\n\u003cli\u003eJoins to any N Code 80 track with standard rail joiners.\u003c\/li\u003e\n\u003cli\u003eRun alongside the #2702 (left-hand) for paired facing-point ladders, crossovers, or wye trackage.\u003c\/li\u003e\n\u003cli\u003eNickel silver rail provides reliable conductivity and stays clean longer than steel or brass.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Manual turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel silver rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2703\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45070857273526,"sku":"150-2703","price":28.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b9183507-40f3-4f6a-8d4e-64b32391f2da.jpg?v=1776736963"},{"product_id":"atlas-2000-n-scale-code-55-30-nickel-silver-super-flex-track-1-piece","title":"Atlas 2000 N Scale Code 55 30\" Nickel Silver Super Flex Track - 1 Piece","description":"\u003cp\u003eAtlas’s N scale Code 55 Super-Flex Track — the prototypical fine-rail alternative to Code 80 for serious N-scale modelers. 30-inch (76.2 cm) flexible section, sold as a single piece.\u003c\/p\u003e\u003cp\u003eCode 55 has the same reliable nickel silver rail as Code 80 but with finer brown ties and smaller rail height for more prototypical appearance. The smaller rail profile may not be compatible with locomotives that have deep flanges — check rolling-stock specifications before installing.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut to length with a rail nipper or fine razor saw.\u003c\/li\u003e\n\u003cli\u003eUse Atlas Code 55 rail joiners; transition joiners are available to connect to Code 80 sections.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with fine ballast.\u003c\/li\u003e\n\u003cli\u003eMost modern N-scale rolling stock and locomotives work without issue; older equipment with deep flanges may need wheel upgrades or stick with Code 80.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 turnouts and crossings for a complete fine-rail trackplan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 55 (.055″ tall)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel silver rail on injection-molded brown ties with wood-grain detail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 30″ (76.2 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174602934,"sku":"150-2000","price":9.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b9054ad0-75c1-4ed8-bcdc-16f063e10881.jpg?v=1777435731"},{"product_id":"atlas-2000-n-scale-code-55-30-nickel-silver-super-flex-track-5-pieces","title":"Atlas 2000 N Scale Code 55 30\" Nickel Silver Super Flex Track - 5 Pieces","description":"\u003cp\u003eAtlas’s N scale Code 55 Super-Flex Track in a \u003cstrong\u003e5-pack value bundle\u003c\/strong\u003e — five 30-inch (76.2 cm) sections of fine-rail nickel silver flex track. 12.5 feet of mainline at a meaningful per-foot saving versus single sections (#2000 1pc).\u003c\/p\u003e\u003cp\u003eCode 55 has the same reliable nickel silver rail as Code 80 but with finer brown ties and smaller rail height for more prototypical appearance — ideal for N-scale modelers who want a more realistic track profile.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut to length with a rail nipper or fine razor saw.\u003c\/li\u003e\n\u003cli\u003eUse Atlas Code 55 rail joiners; transition joiners available to connect to Code 80.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with fine ballast.\u003c\/li\u003e\n\u003cli\u003eMost modern N-scale rolling stock works without issue; older deep-flange equipment may need wheel upgrades.\u003c\/li\u003e\n\u003cli\u003eFor bulk builds, also see the 10-pack (#2000 10pc) and 25-pack (#2000 25pc).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel silver rail on brown ties\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength per section:\u003c\/strong\u003e 30″ (76.2 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 5 pieces (12.5 ft total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2000 (5-pack)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174668470,"sku":"150-2000-5","price":47.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_0cd02df1-75d8-4c4a-8fc6-e193462c914a.jpg?v=1777435736"},{"product_id":"atlas-2000-n-scale-code-55-30-nickel-silver-super-flex-track-10-pieces","title":"Atlas 2000 N Scale Code 55 30\" Nickel Silver Super Flex Track - 10 Pieces","description":"\u003cp\u003eAtlas’s N scale Code 55 Super-Flex Track in a \u003cstrong\u003e10-pack value bundle\u003c\/strong\u003e — ten 30-inch (76.2 cm) sections of fine-rail nickel silver flex track. 25 feet of mainline at meaningful per-foot savings.\u003c\/p\u003e\u003cp\u003eCode 55 nickel silver rail with finer brown ties and smaller rail height delivers a more prototypical look for serious N-scale modelers.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut to length with a rail nipper or fine razor saw.\u003c\/li\u003e\n\u003cli\u003eUse Atlas Code 55 rail joiners; transition joiners to step down from Code 80.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast and weather.\u003c\/li\u003e\n\u003cli\u003eMost modern N-scale equipment is Code 55-compatible; older deep-flange wheels may need replacing.\u003c\/li\u003e\n\u003cli\u003eFor smaller or larger builds, see #2000 single piece and 25-pack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel silver rail on brown ties\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength per section:\u003c\/strong\u003e 30″ (76.2 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 10 pieces (25 ft total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2000 (10-pack)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174734006,"sku":"150-2000-10","price":88.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_cec6b4c4-21b8-40d5-88cf-bf79e1cfbef8.jpg?v=1777435741"},{"product_id":"atlas-2000-n-scale-code-55-30-nickel-silver-super-flex-track-25-pieces","title":"Atlas 2000 N Scale Code 55 30\" Nickel Silver Super Flex Track - 25 Pieces","description":"\u003cp\u003eAtlas’s N scale Code 55 Super-Flex Track in a \u003cstrong\u003e25-pack mega bundle\u003c\/strong\u003e — twenty-five 30-inch (76.2 cm) sections of fine-rail nickel silver flex track. 62.5 feet of mainline at maximum per-foot savings for large-layout builders and clubs.\u003c\/p\u003e\u003cp\u003eCode 55 nickel silver rail with finer brown ties and smaller rail height — the premium fine-rail choice for prototypical N-scale modeling.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStock up for new layout construction, helix builds, or club modules.\u003c\/li\u003e\n\u003cli\u003eCut to length with a rail nipper or fine razor saw.\u003c\/li\u003e\n\u003cli\u003eUse Atlas Code 55 rail joiners; transition joiners available for Code 80 sections.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with fine ballast.\u003c\/li\u003e\n\u003cli\u003eMost modern N-scale equipment is Code 55-compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel silver rail on brown ties\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength per section:\u003c\/strong\u003e 30″ (76.2 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25 pieces (62.5 ft total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2000 (25-pack)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174865078,"sku":"150-2000-25","price":207.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_de33a8d2-f6de-4378-b2c3-baf295a43072.jpg?v=1779571026"},{"product_id":"atlas-2001-n-scale-code-55-6-rerailer-3pcs","title":"Atlas 2001 N Scale Code 55 6\" Rerailer - 3pcs","description":"\u003cp\u003eEvery N-scale layout needs at least one rerailer — and the Atlas #2001 is the Code 55 version of this essential operations tool. Each 6\" straight section has angled re-railing ramps molded into the tie strip that gently guide a derailed wheelset back onto the rails as the train rolls over it, without you having to reach in and re-place every car by hand.\u003c\/p\u003e\u003cp\u003eSold in a 3-pack. Standard Code 55 brown ties and nickel-silver rail; drops in anywhere a 6\" straight section would fit in the Atlas Code 55 system.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall at least one rerailer in each operating area of the layout — they are invisible from above but save countless re-railing chores.\u003c\/li\u003e\n\u003cli\u003ePlace at the end of staging tracks, on yard leads, and just past hidden trackage where derailments are hard to spot.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 straight or curve section with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale wheelsets that pass the NMRA gauge.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Rerailer \/ Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 3 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096848785590,"sku":"150-2001","price":9.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a0ef849a-a39f-487c-bd1e-51004636b1a2.jpg?v=1777494286"},{"product_id":"atlas-2002-n-scale-code-55-6-straight-track-6pcs","title":"Atlas 2002 N Scale Code 55 6\" Straight Track 6pcs","description":"\u003cp\u003eSix pieces of 6\" straight Code 55 track — the building block for tangents, sidings, and yard ladders on any N-scale layout. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of 6\" sections. The 6\" length is the workhorse straight — most tangents are built up from these.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse 6\" sections to fine-tune the length of any tangent — they slot between longer straights to make exact distances work out.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners — solder for permanent installations or leave loose for sectional layouts.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with Woodland Scenics Fine Ballast and Scenic Cement.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale rolling stock that meets the NMRA wheel-flange standard.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2002\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096848916662,"sku":"150-2002","price":11.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a9264023-22a9-4fb4-a1a7-10278cd7ba99.jpg?v=1779570905"},{"product_id":"atlas-2003-n-scale-code-55-4-25-straight-track-6pcs","title":"Atlas 2003 N Scale Code 55 4.25\" Straight Track - 6pcs","description":"\u003cp\u003eSix pieces of 4.25\" straight Code 55 track — the building block for tangents, sidings, and yard ladders on any N-scale layout. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of 4.25\" sections. A short fitter piece — useful between 6\" sections to hit specific overall lengths without cutting.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse 4.25\" sections to fine-tune the length of any tangent — they slot between longer straights to make exact distances work out.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners — solder for permanent installations or leave loose for sectional layouts.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with Woodland Scenics Fine Ballast and Scenic Cement.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale rolling stock that meets the NMRA wheel-flange standard.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2003\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849014966,"sku":"150-2003","price":9.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_5b00c2e0-c3d9-4bf4-b093-597e5c037255.jpg?v=1777494296"},{"product_id":"atlas-2004-n-scale-code-55-3-straight-track-6pcs","title":"Atlas 2004 N Scale Code 55 3\" Straight Track - 6pcs","description":"\u003cp\u003eSix pieces of 3\" straight Code 55 track — the building block for tangents, sidings, and yard ladders on any N-scale layout. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of 3\" sections. Half-length of the 6\" — handy for half-grid offsets and yard lead extensions.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse 3\" sections to fine-tune the length of any tangent — they slot between longer straights to make exact distances work out.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners — solder for permanent installations or leave loose for sectional layouts.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with Woodland Scenics Fine Ballast and Scenic Cement.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale rolling stock that meets the NMRA wheel-flange standard.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2004\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849178806,"sku":"150-2004","price":7.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_977a9491-47b2-4b7d-b89c-8e4639c4e855.jpg?v=1779571085"},{"product_id":"atlas-2005-n-scale-code-55-2-straight-track-6pcs","title":"Atlas 2005 N Scale Code 55 2\" Straight Track - 6pcs","description":"\u003cp\u003eSix pieces of 2\" straight Code 55 track — the building block for tangents, sidings, and yard ladders on any N-scale layout. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of 2\" sections. A short fitter — perfect for tight clearance between turnouts in compact yards.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse 2\" sections to fine-tune the length of any tangent — they slot between longer straights to make exact distances work out.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners — solder for permanent installations or leave loose for sectional layouts.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with Woodland Scenics Fine Ballast and Scenic Cement.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale rolling stock that meets the NMRA wheel-flange standard.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2005\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849244342,"sku":"150-2005","price":7.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_f92d7efd-24a6-4b3e-8a3f-631a30f0e2b7.jpg?v=1777494307"},{"product_id":"atlas-2006-n-scale-code-55-1-25-straight-track-6pcs","title":"Atlas 2006 N Scale Code 55 1.25\" Straight Track - 6pcs","description":"\u003cp\u003eSix pieces of 1.25\" straight Code 55 track — the building block for tangents, sidings, and yard ladders on any N-scale layout. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of 1.25\" sections. One of the shortest fitters Atlas offers — for plugging that last small gap without resorting to flex track.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse 1.25\" sections to fine-tune the length of any tangent — they slot between longer straights to make exact distances work out.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners — solder for permanent installations or leave loose for sectional layouts.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with Woodland Scenics Fine Ballast and Scenic Cement.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale rolling stock that meets the NMRA wheel-flange standard.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2006\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849309878,"sku":"150-2006","price":6.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ce62714e-ff97-4403-89ee-a577ab812b84.jpg?v=1779570966"},{"product_id":"atlas-2008-n-scale-code-55-0-75-straight-track-6pcs","title":"Atlas 2008 N Scale Code 55 0.75\" Straight Track - 6pcs","description":"\u003cp\u003eSix pieces of 0.75\" straight Code 55 track — the building block for tangents, sidings, and yard ladders on any N-scale layout. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of 0.75\" sections. Shortest factory straight — pure fitter piece for getting exact alignment in complex trackwork.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse 0.75\" sections to fine-tune the length of any tangent — they slot between longer straights to make exact distances work out.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners — solder for permanent installations or leave loose for sectional layouts.\u003c\/li\u003e\n\u003cli\u003ePin or glue to cork or foam roadbed; ballast with Woodland Scenics Fine Ballast and Scenic Cement.\u003c\/li\u003e\n\u003cli\u003eWorks with all N-scale rolling stock that meets the NMRA wheel-flange standard.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves of any radius and the #2030\/#2051 turnout family for full layout flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 0.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Straight Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2008\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849408182,"sku":"150-2008","price":6.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_73342d24-0301-4864-aba3-3e1f94b90bbe.jpg?v=1777494317"},{"product_id":"atlas-2010-n-scale-code-55-10-radius-curve-track-full-curve-6pcs","title":"Atlas 2010 N Scale Code 55 10\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 10\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 10\" is the tightest standard Code 55 radius — best for short equipment, branch lines, and industrial spurs.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 10\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 10\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 10\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2010\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849539254,"sku":"150-2010","price":14.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_f13d5964-9df2-4e85-807f-874feeaa39bb.jpg?v=1777494327"},{"product_id":"atlas-2011-n-scale-code-55-10-radius-curve-track-half-curve-6pcs","title":"Atlas 2011 N Scale Code 55 10\" Radius Curve Track Half Curve - 6pcs","description":"\u003cp\u003eSix pieces of 10\" radius Code 55 curve — a half curve section in Atlas's smooth, prototype-look Code 55 system. Half-arc fitter for the 10\" radius — half the angle of a Full Curve, used to tweak the overall arc angle.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Half Curve sections at 10\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 10\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 10\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Half Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2011\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849604790,"sku":"150-2011","price":7.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_d80a15a8-35cd-4fd8-b5e2-ad77dfc7b53a.jpg?v=1777494332"},{"product_id":"atlas-2012-n-scale-code-55-11-25-radius-curve-track-full-curve-6pcs","title":"Atlas 2012 N Scale Code 55 11.25\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 11.25\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 11.25\" is a tight but workable radius — fine for 4-axle diesels and most freight cars.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 11.25\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 11.25\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 11.25\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 11.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2012\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849703094,"sku":"150-2012","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_7f398317-db5c-423b-b073-c6ff2689b184.jpg?v=1779571086"},{"product_id":"atlas-2014-n-scale-code-55-12-5-radius-curve-track-full-curve-6pcs","title":"Atlas 2014 N Scale Code 55 12.5\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 12.5\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 12.5\" is a popular mainline-minimum radius for small N layouts.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 12.5\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 12.5\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 12.5\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 12.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2014\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849801398,"sku":"150-2014","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bc239c3d-5fd8-40b8-a070-371a37359785.jpg?v=1779571086"},{"product_id":"atlas-2015-n-scale-code-55-12-5-radius-curve-track-half-curve-6pcs","title":"Atlas 2015 N Scale Code 55 12.5\" Radius Curve Track Half Curve - 6pcs","description":"\u003cp\u003eSix pieces of 12.5\" radius Code 55 curve — a half curve section in Atlas's smooth, prototype-look Code 55 system. Half-arc fitter for the 12.5\" radius.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Half Curve sections at 12.5\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 12.5\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 12.5\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 12.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Half Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2015\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850063542,"sku":"150-2015","price":8.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_d2c769d6-80d1-48e7-95c2-e32609c01f6c.jpg?v=1779571085"},{"product_id":"atlas-2016-n-scale-code-55-13-75-radius-curve-track-full-curve-6pcs","title":"Atlas 2016 N Scale Code 55 13.75\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 13.75\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 13.75\" is a comfortable medium radius for general-purpose mainline running.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 13.75\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 13.75\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 13.75\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 13.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850129078,"sku":"150-2016","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_44679b48-2c29-4764-94b9-1cc5a1502938.jpg?v=1779570905"},{"product_id":"atlas-2018-n-scale-code-55-15-radius-curve-track-full-curve-6pcs","title":"Atlas 2018 N Scale Code 55 15\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 15\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 15\" is the sweet spot for most modern N-scale fleets — smooth running with 6-axle diesels and longer cars.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 15\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 15\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 15\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2018\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850194614,"sku":"150-2018","price":13.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_796f2d48-48e1-4c32-9527-eeaa5279b77b.png?v=1777494358"},{"product_id":"atlas-2019-n-scale-code-55-15-radius-curve-track-half-curve-6pcs","title":"Atlas 2019 N Scale Code 55 15\" Radius Curve Track Half Curve - 6pcs","description":"\u003cp\u003eSix pieces of 15\" radius Code 55 curve — a half curve section in Atlas's smooth, prototype-look Code 55 system. Half-arc fitter for the 15\" radius.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Half Curve sections at 15\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 15\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 15\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Half Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850260150,"sku":"150-2019","price":8.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_5a541f04-c344-4e2e-acf4-c77da5f0acf8.jpg?v=1777494363"},{"product_id":"atlas-2020-n-scale-code-55-16-25-radius-curve-track-full-curve-6pcs","title":"Atlas 2020 N Scale Code 55 16.25\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 16.25\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 16.25\" gives a noticeably gentler curve — good for visible mainline scenes.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 16.25\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 16.25\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 16.25\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 16.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850325686,"sku":"150-2020","price":11.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c909b5f1-f977-4c41-8675-65e2d06fc246.png?v=1777494368"},{"product_id":"atlas-2023-n-scale-code-55-17-5-radius-curve-track-half-curve-6pcs","title":"Atlas 2023 N Scale Code 55 17.5\" Radius Curve Track Half Curve - 6pcs","description":"\u003cp\u003eSix pieces of 17.5\" radius Code 55 curve — a half curve section in Atlas's smooth, prototype-look Code 55 system. Half-arc fitter for the 17.5\" radius — pair with Full Curves for custom geometry.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Half Curve sections at 17.5\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 17.5\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 17.5\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 17.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Half Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850423990,"sku":"150-2023","price":8.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3c899947-49bc-468c-bba0-7cf9b0b312e5.jpg?v=1779570845"},{"product_id":"atlas-2024-n-scale-code-55-18-75-radius-curve-track-full-curve-6pcs","title":"Atlas 2024 N Scale Code 55 18.75\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 18.75\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 18.75\" is broad enough for the longest 89' auto-rack and intermodal flats.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 18.75\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 18.75\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 18.75\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 18.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850489526,"sku":"150-2024","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_4d32edd9-0b37-44e4-bbe8-30d08f23b278.jpg?v=1777494379"},{"product_id":"atlas-2026-n-scale-code-55-20-radius-curve-track-full-curve-6pcs","title":"Atlas 2026 N Scale Code 55 20\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 20\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 20\" is a broad-mainline radius — very prototypical for the visible portions of a Class I mainline.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 20\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 20\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 20\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 20\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2026\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850555062,"sku":"150-2026","price":13.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b085a86a-ef5a-4162-9225-aa5e1ad1b1fd.jpg?v=1777494384"},{"product_id":"atlas-2028-n-scale-code-55-21-25-radius-curve-track-full-curve-6pcs","title":"Atlas 2028 N Scale Code 55 21.25\" Radius Curve Track Full Curve - 6pcs","description":"\u003cp\u003eSix pieces of 21.25\" radius Code 55 curve — a full curve section in Atlas's smooth, prototype-look Code 55 system. 21.25\" is among the largest Code 55 radii Atlas offers — smooth running for everything in N scale.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of Full Curve sections at 21.25\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the 21.25\" radius arc in your mainline curve — combine 6 Full Curves to make a 67.5° quarter-circle, or 32 to make a full loop.\u003c\/li\u003e\n\u003cli\u003eHalf Curves at the same radius are the matching fitter — drop one in to make non-standard angles.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eMinimum rolling-stock compatibility: most modern N equipment runs fine on 21.25\" radius; longer 6-axle locos and 89' flats prefer the larger radii (15\"+).\u003c\/li\u003e\n\u003cli\u003eMix with shorter Half Curves of the same radius for fine geometry; transition to Code 80 with Atlas Code 55-to-80 transition joiners (#2538).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 21.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e Full Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curve Track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2028\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850620598,"sku":"150-2028","price":9.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_8349476b-0b2b-462d-9d53-8259c04f9380.jpg?v=1779571145"},{"product_id":"atlas-2030-n-scale-code-55-30-609-radius-5-turnout-reverse-curve-6pcs","title":"Atlas 2030 N Scale Code 55 30.609\" Radius #5 Turnout Reverse Curve - 6pcs","description":"\u003cp\u003eThe Atlas #2030 is a specialty curve section sized to exactly match the diverging-route geometry of an Atlas Code 55 #5 turnout (30.609\" radius). Use it after a turnout's diverging leg when you need a smooth, continuous-arc transition into the rest of a curved siding or yard ladder.\u003c\/p\u003e\u003cp\u003eSold in a 6-pack of #5-matched curve sections at 30.609\" radius. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace immediately downstream of an Atlas Code 55 #5 turnout (#2051\/#2052) to extend its diverging route without an awkward kink.\u003c\/li\u003e\n\u003cli\u003eUse in pairs to build crossovers between parallel tracks — the matched radius keeps the S-curve smooth.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eAvoid stacking back-to-back without a short straight in between for long rolling stock — a #2008 0.75\" fitter helps.\u003c\/li\u003e\n\u003cli\u003ePair with #2051 (RH) and #2052 (LH) #5 turnouts for full diverging-route layout work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 30.609\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout-Matched Reverse Curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850686134,"sku":"150-2030","price":11.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_f55fcf95-e553-4c69-b1a7-e3a084f95dcf.jpg?v=1777494394"},{"product_id":"atlas-2040-n-scale-code-55-11-25-degree-crossing","title":"Atlas 2040 N Scale Code 55 11.25 Degree Crossing","description":"\u003cp\u003eA 11.25° diamond crossing in the Atlas Code 55 system — lets two tracks intersect at 11.25° without a turnout. Very shallow angle — gives a long, prototypical diamond crossing as seen in large yards and main-line junctions.\u003c\/p\u003e\u003cp\u003eSingle Code 55 crossing piece. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse where two routes cross at 11.25° — common in interlockings, industrial yards, and prototype-style diamond crossings.\u003c\/li\u003e\n\u003cli\u003eBoth routes are electrically isolated at the crossing frog — wire feeders to all four legs.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eFor shallow 11.25° crossings, watch wheelsets through the frog — sharp frog angles need NMRA-gauge wheels for smooth running.\u003c\/li\u003e\n\u003cli\u003eCombine with Atlas Code 55 #5 \/ #7 turnouts (#2051-series) to build full diamond\/junction trackwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 11.25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Diamond Crossing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2040\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850784438,"sku":"150-2040","price":17.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_69684907-89a0-4052-ada6-780f7e4b1902.jpg?v=1777494399"},{"product_id":"atlas-2041-n-scale-code-55-22-5-degree-crossing","title":"Atlas 2041 N Scale Code 55 22.5 Degree Crossing","description":"\u003cp\u003eA 22.5° diamond crossing in the Atlas Code 55 system — lets two tracks intersect at 22.5° without a turnout. Shallow crossing — useful where two slightly converging routes meet, common at junctions.\u003c\/p\u003e\u003cp\u003eSingle Code 55 crossing piece. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse where two routes cross at 22.5° — common in interlockings, industrial yards, and prototype-style diamond crossings.\u003c\/li\u003e\n\u003cli\u003eBoth routes are electrically isolated at the crossing frog — wire feeders to all four legs.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eFor shallow 22.5° crossings, watch wheelsets through the frog — sharp frog angles need NMRA-gauge wheels for smooth running.\u003c\/li\u003e\n\u003cli\u003eCombine with Atlas Code 55 #5 \/ #7 turnouts (#2051-series) to build full diamond\/junction trackwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 22.5°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Diamond Crossing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2041\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850915510,"sku":"150-2041","price":17.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_cb4f6f11-795f-4491-83f1-f682092537c2.jpg?v=1777494404"},{"product_id":"atlas-2042-n-scale-code-55-30-degree-crossing","title":"Atlas 2042 N Scale Code 55 30 Degree Crossing","description":"\u003cp\u003eA 30° diamond crossing in the Atlas Code 55 system — lets two tracks intersect at 30° without a turnout. Medium-shallow crossing — works well in compact yards.\u003c\/p\u003e\u003cp\u003eSingle Code 55 crossing piece. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse where two routes cross at 30° — common in interlockings, industrial yards, and prototype-style diamond crossings.\u003c\/li\u003e\n\u003cli\u003eBoth routes are electrically isolated at the crossing frog — wire feeders to all four legs.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eFor shallow 30° crossings, watch wheelsets through the frog — sharp frog angles need NMRA-gauge wheels for smooth running.\u003c\/li\u003e\n\u003cli\u003eCombine with Atlas Code 55 #5 \/ #7 turnouts (#2051-series) to build full diamond\/junction trackwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 30°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Diamond Crossing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2042\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096850981046,"sku":"150-2042","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_82d4a2b2-4d74-44d4-8834-d0d91df2d152.jpg?v=1777494410"},{"product_id":"atlas-2043-n-scale-code-55-45-degree-crossing","title":"Atlas 2043 N Scale Code 55 45 Degree Crossing","description":"\u003cp\u003eA 45° diamond crossing in the Atlas Code 55 system — lets two tracks intersect at 45° without a turnout. Classic 45° diamond — fits any track grid where two routes meet at a right-quarter angle.\u003c\/p\u003e\u003cp\u003eSingle Code 55 crossing piece. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse where two routes cross at 45° — common in interlockings, industrial yards, and prototype-style diamond crossings.\u003c\/li\u003e\n\u003cli\u003eBoth routes are electrically isolated at the crossing frog — wire feeders to all four legs.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eFor shallow 45° crossings, watch wheelsets through the frog — sharp frog angles need NMRA-gauge wheels for smooth running.\u003c\/li\u003e\n\u003cli\u003eCombine with Atlas Code 55 #5 \/ #7 turnouts (#2051-series) to build full diamond\/junction trackwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Diamond Crossing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2043\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096851046582,"sku":"150-2043","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_07568987-bdd4-4d18-8160-f5de78410116.jpg?v=1777494414"},{"product_id":"atlas-2044-n-scale-code-55-60-degree-crossing","title":"Atlas 2044 N Scale Code 55 60 Degree Crossing","description":"\u003cp\u003eA 60° diamond crossing in the Atlas Code 55 system — lets two tracks intersect at 60° without a turnout. Steep crossing — common where industrial tracks cross main lines at a sharper angle.\u003c\/p\u003e\u003cp\u003eSingle Code 55 crossing piece. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse where two routes cross at 60° — common in interlockings, industrial yards, and prototype-style diamond crossings.\u003c\/li\u003e\n\u003cli\u003eBoth routes are electrically isolated at the crossing frog — wire feeders to all four legs.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eFor shallow 60° crossings, watch wheelsets through the frog — sharp frog angles need NMRA-gauge wheels for smooth running.\u003c\/li\u003e\n\u003cli\u003eCombine with Atlas Code 55 #5 \/ #7 turnouts (#2051-series) to build full diamond\/junction trackwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Diamond Crossing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2044\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096851112118,"sku":"150-2044","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_25eb8c10-8d9c-4d52-82f9-4a6734feaefd.jpg?v=1777494419"},{"product_id":"atlas-2045-n-scale-code-55-90-degree-crossing","title":"Atlas 2045 N Scale Code 55 90 Degree Crossing","description":"\u003cp\u003eA 90° diamond crossing in the Atlas Code 55 system — lets two tracks intersect at 90° without a turnout. Perpendicular crossing — the simplest geometry, ideal for compact double-line crossings.\u003c\/p\u003e\u003cp\u003eSingle Code 55 crossing piece. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse where two routes cross at 90° — common in interlockings, industrial yards, and prototype-style diamond crossings.\u003c\/li\u003e\n\u003cli\u003eBoth routes are electrically isolated at the crossing frog — wire feeders to all four legs.\u003c\/li\u003e\n\u003cli\u003eJoins to any Atlas Code 55 piece with concealed rail joiners.\u003c\/li\u003e\n\u003cli\u003eFor shallow 90° crossings, watch wheelsets through the frog — sharp frog angles need NMRA-gauge wheels for smooth running.\u003c\/li\u003e\n\u003cli\u003eCombine with Atlas Code 55 #5 \/ #7 turnouts (#2051-series) to build full diamond\/junction trackwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Diamond Crossing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2045\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096851931318,"sku":"150-2045","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_30fa9e4d-bf42-44c7-926a-2382883f9280.jpg?v=1777494424"},{"product_id":"atlas-2051-n-scale-code-55-rh-right-hand-5-turnout","title":"Atlas 2051 N Scale Code 55 RH Right Hand #5 Turnout","description":"\u003cp\u003eThe Atlas #2051 is a Code 55 #5 right-hand turnout — the right-side version of Atlas's standard mainline turnout in the prototypically scaled Code 55 system. A #5 frog gives a 30.609\" diverging-route radius — gentle enough for the longest N-scale equipment to run smoothly through, while still compact enough for crossovers and yard leads.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent on the throw bar. Nickel-silver rail, brown ties, concealed joiners. Atlas Code 55 is the prototypically scaled N-scale track system, with .055\" tall nickel-silver rail set in brown ties for a far more realistic appearance than Code 80. All rail joiners are concealed within the tie strip, giving smooth, hidden transitions between sections. Compatible with all modern N-scale equipment (Atlas, Kato, MicroTrains, current Bachmann, etc.); some older deep-flange stock may bind on Code 55 — check wheels first.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the right-diverging turnout in main-line crossovers, junction trackwork, and yard ladders.\u003c\/li\u003e\n\u003cli\u003ePair with #2052 (left-hand #5) for symmetrical crossovers between parallel tracks.\u003c\/li\u003e\n\u003cli\u003eUse #2030 (#5-matched 30.609\" curve) downstream of the diverging leg for smooth continuous-arc sidings.\u003c\/li\u003e\n\u003cli\u003eThrow manually with finger pressure on the throw bar, or add an under-table switch machine (Tortoise, Atlas Snap-Switch with adapter) for remote control.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered — gap and feed the frog separately if running DCC sound locomotives across the frog at low speed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrog Number:\u003c\/strong\u003e #5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiverging Radius:\u003c\/strong\u003e 30.609\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Right-Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrow:\u003c\/strong\u003e Manual (spring-detent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2051\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096852062390,"sku":"150-2051","price":29.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bc80b860-e5aa-440e-aa88-933f5a7b1e8a.jpg?v=1777494434"},{"product_id":"atlas-2052-n-scale-code-55-lh-left-hand-7-turnout","title":"Atlas 2052 N Scale Code 55 LH Left Hand #7 Turnout","description":"\u003cp\u003eThe Atlas #2052 is a Code 55 #7 left-hand turnout — Atlas's broader-frog mainline turnout in the prototypically scaled Code 55 system. A #7 frog gives a wider diverging angle than a #5 but smoother flow — preferred for high-speed mainline crossovers and modern roster equipment.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent. The Atlas Code 55 turnout family is the prototypically scaled N-scale switch system — .055\" tall nickel-silver rail in brown ties, concealed joiners, and matched diverging-route geometry to Atlas's Code 55 curves. All routes are factory powered.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the left-diverging turnout in mainline crossovers and yard ladders where smooth high-speed routing matters.\u003c\/li\u003e\n\u003cli\u003ePair with #2053 (right-hand #7) for symmetric mainline crossovers.\u003c\/li\u003e\n\u003cli\u003eThrow manually or with under-table machine like Atlas #2065 or Tortoise.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas Code 55 curves and straights for a complete N-scale mainline.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrog Number:\u003c\/strong\u003e #7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left-Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrow:\u003c\/strong\u003e Manual (spring-detent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2052\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096852160694,"sku":"150-2052","price":30.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_f3961243-a8c8-4f1a-a9fc-79403e885f70.jpg?v=1777494439"},{"product_id":"atlas-2050-n-scale-code-55-lh-left-hand-5-turnout","title":"Atlas 2050 N Scale Code 55 LH Left Hand #5 Turnout","description":"\u003cp\u003eThe Atlas #2050 is a Code 55 #5 left-hand turnout — the left-side companion to the #2051 right-hand. A #5 frog gives a 30.609\" diverging-route radius — gentle for the longest N-scale equipment but compact enough for crossovers and yard leads.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent. The Atlas Code 55 turnout family is the prototypically scaled N-scale switch system — .055\" tall nickel-silver rail in brown ties, concealed joiners, and matched diverging-route geometry to Atlas's Code 55 curves. All routes are factory powered.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the left-diverging turnout in mainline crossovers, junction trackwork, and yard ladders.\u003c\/li\u003e\n\u003cli\u003ePair with #2051 (right-hand #5) for symmetrical mainline crossovers.\u003c\/li\u003e\n\u003cli\u003eUse #2030 (#5-matched 30.609\" curve) downstream of the diverging leg for continuous-arc sidings.\u003c\/li\u003e\n\u003cli\u003eThrow manually or add under-table machine like Atlas #2065 or Tortoise.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrog Number:\u003c\/strong\u003e #5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiverging Radius:\u003c\/strong\u003e 30.609\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left-Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrow:\u003c\/strong\u003e Manual (spring-detent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2050\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096852488374,"sku":"150-2050","price":28.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_49a8d375-362a-428d-814b-9545aa6cf9dd.png?v=1777494460"},{"product_id":"atlas-2054-n-scale-code-55-lh-left-hand-10-turnout","title":"Atlas 2054 N Scale Code 55 LH Left Hand #10 Turnout","description":"\u003cp\u003eThe Atlas #2054 is a Code 55 #10 left-hand turnout — Atlas's broadest mainline turnout in the prototypically scaled Code 55 system. A #10 frog gives the gentlest diverging angle of the line — preferred for prototype-style high-speed mainline crossovers where smooth running is paramount.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent. The Atlas Code 55 turnout family is the prototypically scaled N-scale switch system — .055\" tall nickel-silver rail in brown ties, concealed joiners, and matched diverging-route geometry to Atlas's Code 55 curves. All routes are factory powered.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as the left-diverging turnout in visible mainline crossovers — the broad geometry looks especially prototypical.\u003c\/li\u003e\n\u003cli\u003ePair with #2055 (right-hand #10) for symmetric crossovers.\u003c\/li\u003e\n\u003cli\u003eThrow manually or with under-table machine like Atlas #2065 or Tortoise.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered.\u003c\/li\u003e\n\u003cli\u003eBest paired with broader-radius curves (15\"+) for smooth visual flow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrog Number:\u003c\/strong\u003e #10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left-Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrow:\u003c\/strong\u003e Manual (spring-detent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2054\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096861597878,"sku":"150-2054","price":31.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b8f107ae-4c8b-4d12-af18-edabd490cdde.jpg?v=1777495677"},{"product_id":"atlas-2056-n-scale-code-55-2-5-wye-y-turnout-new","title":"Atlas 2056 N Scale Code 55 #2.5 Wye\/Y Turnout","description":"\u003cp\u003eThe Atlas #2056 is a Code 55 #2.5 wye (Y) turnout — both legs diverge at equal angles instead of one straight + one diverging. The #2.5 frog number gives a tight, compact geometry useful for symmetric branches off main yards, wye tracks for turning equipment, and reverse-loop trackage.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent. The Atlas Code 55 turnout family is the prototypically scaled N-scale switch system — .055\" tall nickel-silver rail in brown ties, concealed joiners, and matched diverging-route geometry to Atlas's Code 55 curves. All routes are factory powered.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse to create a 3-leg wye for turning locomotives or whole trains end-for-end.\u003c\/li\u003e\n\u003cli\u003eCompact geometry — ideal where space is tight but you still need a symmetric divergence.\u003c\/li\u003e\n\u003cli\u003ePair with #2057 (#3.5 wye) for slightly broader symmetric geometry where space allows.\u003c\/li\u003e\n\u003cli\u003eThrow manually or with under-table machine like Atlas #2065 or Tortoise.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrog Number:\u003c\/strong\u003e #2-1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Wye (symmetric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2056\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096861663414,"sku":"150-2056","price":31.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ed7c3c0d-c560-4079-b0fa-d8b308cc50d0.jpg?v=1777495678"},{"product_id":"atlas-2057-n-scale-code-55-3-5-wye-y-turnout-new","title":"Atlas 2057 N Scale Code 55 #3.5 Wye\/Y Turnout","description":"\u003cp\u003eThe Atlas #2057 is a Code 55 #3.5 wye (Y) turnout — both legs diverge at equal angles. Broader frog than the #2.5 wye for slightly gentler symmetric trackwork — best where the layout has room for a more prototypical-looking wye.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent. The Atlas Code 55 turnout family is the prototypically scaled N-scale switch system — .055\" tall nickel-silver rail in brown ties, concealed joiners, and matched diverging-route geometry to Atlas's Code 55 curves. All routes are factory powered.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse for 3-leg wye geometry for turning locos or whole trains — gentler curves than the #2.5.\u003c\/li\u003e\n\u003cli\u003eBest for visible\/foreground wye trackage where prototypical appearance matters.\u003c\/li\u003e\n\u003cli\u003ePair with #2056 (#2.5 wye) if you need a tighter alternative for staging or hidden trackage.\u003c\/li\u003e\n\u003cli\u003eThrow manually or with under-table machine like Atlas #2065 or Tortoise.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrog Number:\u003c\/strong\u003e #3-1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Wye (symmetric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2057\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096861728950,"sku":"150-2057","price":23.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_2201b691-c485-4bb4-85fb-aa19af2bbe8b.jpg?v=1777495683"},{"product_id":"atlas-2058-n-scale-code-55-curved-lh-left-hand-21-25-inside-15-outside-turnout","title":"Atlas 2058 N Scale Code 55 Curved LH Left Hand 21.25\" inside\/15\" outside Turnout","description":"\u003cp\u003eThe Atlas #2058 is a Code 55 curved left-hand turnout — both routes are curved (21-1\/4\" outside, 15\" inside radius) instead of one straight + one diverging. Curved turnouts let you maintain mainline flow on the outer track while branching off to an inner track at a continuous curve — useful for prototypical mainline crossovers and yard throats on broad curves.\u003c\/p\u003e\u003cp\u003eManual-throw turnout with built-in spring detent. The Atlas Code 55 turnout family is the prototypically scaled N-scale switch system — .055\" tall nickel-silver rail in brown ties, concealed joiners, and matched diverging-route geometry to Atlas's Code 55 curves. All routes are factory powered.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse on broad curves where you need to branch off without a straight section interrupting the visual flow.\u003c\/li\u003e\n\u003cli\u003ePair with a matching right-hand curved turnout for double-track crossovers on continuous curves.\u003c\/li\u003e\n\u003cli\u003eInner route at 15\" radius — confirm rolling stock compatibility before purchase.\u003c\/li\u003e\n\u003cli\u003eThrow manually or with under-table machine like Atlas #2065 or Tortoise.\u003c\/li\u003e\n\u003cli\u003eAll routes electrically powered.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Radius:\u003c\/strong\u003e 21.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Radius:\u003c\/strong\u003e 15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left-Hand (curved)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Curved Turnout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2058\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096861794486,"sku":"150-2058","price":34.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a92d00c9-ba4e-44c0-bdfa-6fc4364a87af.jpg?v=1777495689"},{"product_id":"atlas-2065-n-scale-code-55-turnout-under-table-switch-machine-new","title":"Atlas 2065 N Scale Code 55 Turnout Under Table Switch Machine","description":"\u003cp\u003eThe Atlas #2065 is the under-table switch machine designed specifically for Atlas N Code 55 turnouts — letting you throw turnouts remotely from a control panel instead of finger-throwing them by hand. Mounts under the layout, with a vertical actuator that engages the turnout's throw bar through a small hole in the roadbed.\u003c\/p\u003e\u003cp\u003eSolenoid-style switch machine with built-in twin coils — pulse one coil to throw, the other to throw back. Operates on standard 12-16V AC accessory power.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts under the table directly below an Atlas Code 55 turnout — drill a small hole through the roadbed for the actuator pin.\u003c\/li\u003e\n\u003cli\u003eWire each machine to a momentary push-button (e.g. Atlas #56 Controller, Capacitor Discharge Unit) — do not use continuous power.\u003c\/li\u003e\n\u003cli\u003ePower from a 12-16V AC accessory transformer tap, NOT from track DC power.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas #201 spade connectors for fast solderless hookup to the controller.\u003c\/li\u003e\n\u003cli\u003eCompatible with Atlas Code 55 turnouts #2050, #2051, #2052, #2053, #2054, #2055, #2056, #2057, #2058.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Under-Table Switch Machine (Twin-Coil Solenoid)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC (momentary pulse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e Atlas Code 55 Turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2065\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862023862,"sku":"150-2065","price":30.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_0719869c-f48a-44ce-81f6-3e60c2776497.png?v=1777495694"},{"product_id":"atlas-2070-n-scale-through-truss-bridge-kit-w-code-55-nickel-silver-rail-new","title":"Atlas 2070 N Scale Through Truss Bridge Kit w\/Code 55 Nickel-Silver Rail","description":"\u003cp\u003eThe Atlas N Through-Truss Bridge represents one of the most iconic structures of North American railroading — a riveted-steel Pratt or Warren truss spanning a river, canyon, or wide road. Atlas's plastic kit captures the prototype in 1:160 with crisp moulded rivet detail and ships with Code 55 track already installed on the deck, ready to drop into any layout. Standard mineral-red bridge color.\u003c\/p\u003e\u003cp\u003eEasy-assemble plastic kit with snap-together construction; Code 55 nickel-silver rail on brown ties pre-installed on the deck.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrops into any Atlas Code 55 mainline run — joins to adjacent track with concealed Code 55 rail joiners.\u003c\/li\u003e\n\u003cli\u003eBridge deck length matches a standard Atlas Code 55 straight section.\u003c\/li\u003e\n\u003cli\u003eAdd Atlas pier or abutment kits (#2547\/#2548 series) for full bridge approach detail.\u003c\/li\u003e\n\u003cli\u003eBest for visible-foreground river spans, canyon crossings, or dramatic over-road scenes.\u003c\/li\u003e\n\u003cli\u003ePaint can be weathered with washes and powders for prototypical rust\/grime effects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Through-Truss Bridge Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack:\u003c\/strong\u003e Code 55 nickel-silver rail, brown ties (pre-installed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2070\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862122166,"sku":"150-2070","price":30.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a5840f96-4911-4c5d-b6ee-cc478ea2eedd.jpg?v=1779571085"},{"product_id":"atlas-2071-n-scale-through-truss-bridge-kit-w-code-55-nickel-silver-rail-silver","title":"Atlas 2071 N Scale Through Truss Bridge Kit w\/Code 55 Nickel-Silver Rail- Silver","description":"\u003cp\u003eThe Atlas N Through-Truss Bridge represents one of the most iconic structures of North American railroading — a riveted-steel Pratt or Warren truss spanning a river, canyon, or wide road. Atlas's plastic kit captures the prototype in 1:160 with crisp moulded rivet detail and ships with Code 55 track already installed on the deck, ready to drop into any layout. Silver\/aluminum bridge color — represents galvanized or aluminum prototypes.\u003c\/p\u003e\u003cp\u003eEasy-assemble plastic kit with snap-together construction; Code 55 nickel-silver rail on brown ties pre-installed on the deck.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrops into any Atlas Code 55 mainline run — joins to adjacent track with concealed Code 55 rail joiners.\u003c\/li\u003e\n\u003cli\u003eBridge deck length matches a standard Atlas Code 55 straight section.\u003c\/li\u003e\n\u003cli\u003eAdd Atlas pier or abutment kits (#2547\/#2548 series) for full bridge approach detail.\u003c\/li\u003e\n\u003cli\u003eBest for visible-foreground river spans, canyon crossings, or dramatic over-road scenes.\u003c\/li\u003e\n\u003cli\u003ePaint can be weathered with washes and powders for prototypical rust\/grime effects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Through-Truss Bridge Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack:\u003c\/strong\u003e Code 55 nickel-silver rail, brown ties (pre-installed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2071\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862187702,"sku":"150-2071","price":30.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_2a47e765-44a2-4b3b-8025-e27518dddd1c.png?v=1779570845"},{"product_id":"atlas-2080-n-scale-single-track-through-girder-bridge-kit-w-code-55-track-new","title":"Atlas 2080 N Scale Single Track Through Girder Bridge Kit w\/Code 55 Track","description":"\u003cp\u003eThe Atlas N Through Plate-Girder Bridge models prototypes where the bridge deck is supported between two tall plate girders — giving the bridge its easily-identifiable U-shaped cross-section. Used everywhere in North American railroading for moderate-span crossings of roads, small rivers, and yards. Single-track configuration with Code 55 track on brown ties pre-installed.\u003c\/p\u003e\u003cp\u003ePlastic kit with snap-together construction; Code 55 nickel-silver rail pre-installed on the deck. Add-on kits available to extend to multi-track.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrops into any Atlas Code 55 mainline run — joins with concealed Code 55 rail joiners.\u003c\/li\u003e\n\u003cli\u003eBest for short-to-medium spans over roads, small rivers, or yards.\u003c\/li\u003e\n\u003cli\u003eStack two side-by-side with an add-on kit for double-track crossings.\u003c\/li\u003e\n\u003cli\u003eAdd Atlas pier or abutment kits for full bridge approach detail.\u003c\/li\u003e\n\u003cli\u003eExcellent for layouts where through-truss bridges would be too dominant visually.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Through Plate-Girder Bridge Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack:\u003c\/strong\u003e Code 55 nickel-silver rail, brown ties (pre-installed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracks:\u003c\/strong\u003e Single (extendable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2080\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862253238,"sku":"150-2080","price":27.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_9d82b33c-219f-417b-9506-f655b768925c.png?v=1779570845"},{"product_id":"atlas-2091-n-scale-code-55-insulated-rail-joiners-24pcs","title":"Atlas 2091 N Scale Code 55 Insulated Rail Joiners 24pcs","description":"\u003cp\u003eThe Atlas #2091 is a 24-pack of insulated rail joiners for Atlas N Code 55 track. They look identical to regular rail joiners but are molded from non-conductive plastic — electrically isolating one section of rail from the next, which is essential for block-power wiring, frog isolation on turnouts, and DCC reverse-loop boundaries.\u003c\/p\u003e\u003cp\u003e24 pieces per pack. Black plastic, fits the same concealed-joiner profile as regular Atlas Code 55 metal joiners.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse to break a track section into electrically isolated blocks for cab-control DC wiring.\u003c\/li\u003e\n\u003cli\u003eInstall both rails at any DCC reverse-loop or wye boundary to define the auto-reverse zone.\u003c\/li\u003e\n\u003cli\u003eUse to isolate turnout frogs for live-frog\/dead-frog wiring options.\u003c\/li\u003e\n\u003cli\u003eSlot in like a regular joiner — no soldering or tools needed.\u003c\/li\u003e\n\u003cli\u003eCompatible with all Atlas Code 55 N track and turnouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Insulated Rail Joiners (Plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 24 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2091\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862351542,"sku":"150-2091","price":4.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_5c4fbafd-696c-4d6b-831b-a1ed6eecd7cf.jpg?v=1777495714"},{"product_id":"atlas-2406-n-code-65-nickel-silver-6-terminal-track-with-equipment-shed-pack","title":"Atlas 2406 N Scale Code 65 Nickel Silver 6\" Terminal Track with Equipment Shed (Pack","description":"\u003cp\u003eThe Atlas #2406 is a 6\" terminal track section from Atlas's N scale True-Track® line — Code 65 nickel-silver rail moulded onto a grey-ballast plastic roadbed, with two pre-attached wire feeders ready to plug into a power pack or DCC bus, plus a snap-on Equipment Shed scenic accessory.\u003c\/p\u003e\u003cp\u003eCode 65 rail strikes a balance between the appearance of finer Code 55 and the operational tolerance of Code 80, accepting most current N rolling stock without flange clearance issues. The integrated roadbed has positive locking tabs so sections snap solidly together and stay aligned. The included Equipment Shed dresses up the feeder location to look like a prototype trackside utility building.\u003c\/p\u003e\u003cp\u003eTrue-Track is Atlas's quick-build pre-ballasted track system for permanent or temporary N scale layouts — ideal for table-top, holiday, and starter setups, fully compatible with the rest of the Code 65 True-Track range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 65 nickel silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e True-Track® (integrated grey roadbed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 6\" Straight Terminal Section with Equipment Shed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2406\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096863236278,"sku":"150-2406","price":20.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a686865e-1df6-41f5-b61f-99348a119653.jpg?v=1777495778"},{"product_id":"atlas-2500-n-scale-code-80-super-flex®-track-29-5-1-piece","title":"Atlas 2500 N Scale Code 80 Super-Flex® Track 29.5\" - 1 Piece","description":"\u003cp\u003eThe Atlas #2500 is a 29.5\" length of Atlas N scale Super-Flex® track in Code 80 nickel silver, with black plastic ties — the workhorse flex track for N scale main lines, sidings, and freelance trackplans.\u003c\/p\u003e\u003cp\u003eSuper-Flex® bends to any radius down to ~9¾\" without kinking, lets you cut to any length, and accepts standard Atlas Code 80 rail joiners and turnouts. Black ties with prototype tie spacing look right under both transition-era and modern layouts; nickel-silver rail conducts cleanly and resists tarnishing.\u003c\/p\u003e\u003cp\u003eSold as a single 29.5\" length — ideal for one-piece custom curve and siding fitting. Pair with Atlas Code 80 turnouts, crossings, and Snap-Track for a complete N scale Code 80 track system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 80 nickel silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Super-Flex® Flexible Track, 29.5\" length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTie color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece (29.5\" \/ 75 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096863301814,"sku":"150-2500","price":9.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c9d1f746-ebba-4329-8724-df1b79ab4e70.jpg?v=1779570965"},{"product_id":"atlas-2500-n-scale-code-80-super-flex®-track-29-5-5-pieces","title":"Atlas 2500 N Scale Code 80 Super-Flex® Track 29.5\" - 5 Pieces","description":"\u003cp\u003eThe Atlas #2500 is a 29.5\" length of Atlas N scale Super-Flex® track in Code 80 nickel silver, with black plastic ties — the workhorse flex track for N scale main lines, sidings, and freelance trackplans.\u003c\/p\u003e\u003cp\u003eSuper-Flex® bends to any radius down to ~9¾\" without kinking, lets you cut to any length, and accepts standard Atlas Code 80 rail joiners and turnouts. Black ties with prototype tie spacing look right under both transition-era and modern layouts; nickel-silver rail conducts cleanly and resists tarnishing.\u003c\/p\u003e\u003cp\u003eSold as a 5-piece bundle — 12.3 ft (~3.7 m) of continuous flex in one pack. Pair with Atlas Code 80 turnouts, crossings, and Snap-Track for a complete N scale Code 80 track system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 80 nickel silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Super-Flex® Flexible Track, 29.5\" length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTie color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 5 pieces (12.3 ft \/ 3.7 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096863367350,"sku":"150-2500-5","price":43.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3eb3e490-4457-424e-a3fa-7a294c8d21ba.jpg?v=1777495788"}],"url":"https:\/\/oakvillemodeltrains.com\/collections\/n-track-and-turnouts.oembed?page=9","provider":"Oakville Model Trains Depot","version":"1.0","type":"link"}