{"title":"N Accessories \u0026 Parts","description":"\u003cp\u003eN Accessories \u0026amp; Parts gathers the small components that finish an \u003ca href=\"\/collections\/n-scale\"\u003eN scale\u003c\/a\u003e layout — rail joiners (nickel silver and insulated), wooden ties for flex \u003ca href=\"\/collections\/track\"\u003etrack\u003c\/a\u003e, uncouplers, fixing pins, track buffer stops, planning books and replacement chassis kits. Most modellers visit this collection to keep an active build moving, not to start one.\u003c\/p\u003e\u003cp\u003eWe stock from \u003ca href=\"\/collections\/atlas\"\u003eAtlas\u003c\/a\u003e (code 80 nickel silver joiners in 48-packs, rail joiners, the \"Nine Railroads\" layout plan book), \u003ca href=\"\/collections\/peco\"\u003ePeco\u003c\/a\u003e (N code 55\/80 nickel silver and insulated joiners, wooden ties in 24-packs, NR-123 10ft wheelbase wagon chassis kits, uncouplers, fixing pins) and accessory parts from manufacturers like \u003ca href=\"\/collections\/intermountain\"\u003eInterMountain\u003c\/a\u003e for N-scale brass insulated wheelsets in 12-packs.\u003c\/p\u003e\u003cp\u003ePair this collection with \u003ca href=\"\/collections\/n-track-and-turnouts\"\u003eN Track \u0026amp; Turnouts\u003c\/a\u003e for the underlying track, \u003ca href=\"\/collections\/kadee\"\u003eKadee\u003c\/a\u003e for N-scale couplers and trucks, and \u003ca href=\"\/collections\/microscale-industries\"\u003eMicroscale Industries\u003c\/a\u003e for waterslide \u003ca href=\"\/collections\/decals\"\u003edecals\u003c\/a\u003e to letter your equipment. Ships from Oakville, Ontario. Free shipping on orders over $250. Contact us for special orders.\u003c\/p\u003e","products":[{"product_id":"atlas-190-gear-lubricant-5-oz","title":"Atlas 190 Gear Lubricant .5 oz","description":"\u003cp\u003eAtlas’s gear-grade lubricant for HO and N scale locomotive gear trains. A heavier-bodied oil specifically formulated for the geared portion of the drive train — from the worm to the truck spur gears.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApply a small drop directly to the worm gear, worm wheel, and primary spur gears.\u003c\/li\u003e\n\u003cli\u003eUse sparingly — over-lubrication attracts dust and dirt.\u003c\/li\u003e\n\u003cli\u003eBest applied during routine locomotive maintenance (every 50-100 operating hours).\u003c\/li\u003e\n\u003cli\u003eFor motor bearings and lighter parts, use Atlas #191 Motor Bearing Lubricant.\u003c\/li\u003e\n\u003cli\u003eComes as a complete kit with #191 and #192 in the #193 Loco \u0026amp; Track Maintenance Package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO \u0026amp; N (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gear lubricant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 0.5 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 190\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095173947574,"sku":"150-190","price":13.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_fa5889c7-e040-462e-b04f-83e9ca076c8e.jpg?v=1777435676"},{"product_id":"atlas-191-motor-bearing-lubricant","title":"Atlas 191 Motor Bearing Lubricant","description":"\u003cp\u003eAtlas’s motor bearing lubricant — a light-bodied oil formulated for HO and N scale locomotive motor bearings and lighter gear contacts. Use for the motor shaft bearings where Atlas #190 Gear Lubricant would be too heavy.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApply a single small drop to each motor bearing during routine maintenance.\u003c\/li\u003e\n\u003cli\u003eUse sparingly — over-lubrication attracts dust and can drip onto track.\u003c\/li\u003e\n\u003cli\u003eFor the heavier gear train (worm gear, spur gears), use Atlas #190 Gear Lubricant.\u003c\/li\u003e\n\u003cli\u003eIncluded in the Atlas #193 Loco \u0026amp; Track Maintenance Package alongside #190 and #192.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO \u0026amp; N (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Motor bearing lubricant (light oil)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 191\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174144182,"sku":"150-191","price":17.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_765e6931-50df-4c4e-8ec6-82e5c48d95e2.png?v=1777435694"},{"product_id":"atlas-193-loco-track-maintenance-package-3-pk","title":"Atlas 193 Loco \u0026 Track Maintenance Package (3\/Pk)","description":"\u003cp\u003eAtlas’s Loco \u0026amp; Track Maintenance Package combines three essentials for keeping locomotives running smoothly and track clean — all in one bundle.\u003c\/p\u003e\u003ch3\u003eWhat’s included (3 items)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e#190 Gear Lubricant (0.5 oz)\u003c\/strong\u003e — heavier-bodied oil for locomotive gear trains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e#191 Motor Bearing Lubricant\u003c\/strong\u003e — light oil for motor bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e#192 Conducta-Lube\u003c\/strong\u003e — conductive lubricant for electrical pickups and wheel surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApply gear lubricant (#190) sparingly to worm and spur gears during routine maintenance.\u003c\/li\u003e\n\u003cli\u003eApply motor bearing oil (#191) one drop per bearing.\u003c\/li\u003e\n\u003cli\u003eApply Conducta-Lube (#192) lightly to wheel treads and electrical contacts to maintain conductivity.\u003c\/li\u003e\n\u003cli\u003eAn ideal kit for new modelers or as a refill for the maintenance bench.\u003c\/li\u003e\n\u003cli\u003eFor track cleaning, pair with Atlas #194 Track Cleaning Fluid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO \u0026amp; N (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Maintenance kit (3 items)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Atlas #190 + #191 + #192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 193\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174340790,"sku":"150-193","price":45.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bd07c5c4-ae07-4763-8245-cffd23ee7856.jpg?v=1777435710"},{"product_id":"atlas-194-track-cleaning-fluid-1oz","title":"Atlas 194 Track Cleaning Fluid 1oz","description":"\u003cp\u003eAtlas’s 1-ounce track-cleaning fluid — a solvent specifically formulated to clean oxidation, dirt, and oil residue from HO, N, and other model railroad track. Restores reliable electrical conductivity.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApply sparingly to a clean rag or track-cleaning pad.\u003c\/li\u003e\n\u003cli\u003eWipe along the railhead in the direction of the rail to lift off accumulated dirt and tarnish.\u003c\/li\u003e\n\u003cli\u003eFollow up with a dry pad or cleaning car (Atlas, Walthers, or Centerline) to remove residue.\u003c\/li\u003e\n\u003cli\u003eRoutine cleaning every 5-10 operating hours keeps trains running smoothly.\u003c\/li\u003e\n\u003cli\u003eCompatible with nickel silver, brass, and steel rail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e Universal (HO, N, O, etc.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Track cleaning fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 1 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 194\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174406326,"sku":"150-194","price":11.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_32690a1b-9ae2-4291-b2aa-0f53e95c0e39.jpg?v=1779570966"},{"product_id":"atlas-200-snap-relay-new","title":"Atlas 200 Snap Relay","description":"\u003cp\u003eThe Atlas Snap Relay is a double-pole double-throw (DPDT) relay actuated by a momentary-power twin-coil solenoid — the same mechanism as Atlas’s remote turnout solenoids. Use it as an electronic switching element for layout wiring.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWire one solenoid coil to each direction of a momentary push-button or Atlas controller.\u003c\/li\u003e\n\u003cli\u003eThe relay flips one of two contact pairs each time the appropriate coil pulses.\u003c\/li\u003e\n\u003cli\u003eCommon applications: power routing for reverse loops or staging yards, signal logic, frog polarity switching, or coupling multiple turnouts to throw together.\u003c\/li\u003e\n\u003cli\u003ePower solenoid coils from a 12-16V AC accessory tap (not continuous DC).\u003c\/li\u003e\n\u003cli\u003eCompatible with Atlas Code 80, Code 83, and Code 100 turnout control circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e Universal (HO, N, O)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e DPDT momentary relay (twin-coil solenoid)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45095174537398,"sku":"150-200","price":25.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c592c688-113c-4c88-bb5a-003a53bccadd.jpg?v=1777435725"},{"product_id":"atlas-201-3-spade-tongue-solderless-connectors-24pcs","title":"Atlas 201 #3 Spade Tongue Solderless Connectors - 24pcs","description":"\u003cp\u003eThe Atlas #201 is a pack of small U-shaped spade connectors for hooking up layout wiring — feeders, switch-machine leads, accessory power — to the screw terminals on Atlas Snap Relays, controllers, and similar accessories, without soldering.\u003c\/p\u003e\u003cp\u003e24 connectors per pack. Designed for AWG 18-22 stranded or solid hookup wire and #3 screw posts. Maximum width across the spade tongue is .218\".\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStrip about 3\/8\" of insulation from your hookup wire, slide it into the connector, and crimp with any standard wire-terminal crimping tool.\u003c\/li\u003e\n\u003cli\u003eSlide the spade tongue under the screw head of a #3 post and tighten — no soldering, removable anytime.\u003c\/li\u003e\n\u003cli\u003eUse on Atlas controllers (#56, #205, #220), Snap-Relay\/Switch wiring panels, and any layout accessory with #3 screw terminals.\u003c\/li\u003e\n\u003cli\u003eWorks with any standard 18-22 AWG layout hookup wire (Atlas #311, Miniatronics, etc.).\u003c\/li\u003e\n\u003cli\u003eReplace yearly on heavily-used accessories — corrosion eventually loosens any spring contact.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e All scales \/ Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wire Connectors — Spade Tongue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e AWG 18-22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost Size:\u003c\/strong\u003e #3 Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 24 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096849473718,"sku":"150-201","price":10.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_140935b6-fa8e-4770-8355-28668c1533c5.jpg?v=1777494322"},{"product_id":"atlas-205-all-scale-connector-control-box","title":"Atlas 205 All Scale Connector Control Box","description":"\u003cp\u003eThe Atlas #205 Connector is a small panel-mount box with three SPST on-off switches wired in parallel. Use it inline with any layout circuit — track block, accessory bus, lighting feed — when you want simple, click-it on-or-off control without a more elaborate cab-control system.\u003c\/p\u003e\u003cp\u003eThree independent SPST switches in one molded plastic housing with thumb-screw terminals. Can be daisy-chained side-by-side with other Atlas Connector boxes (#205, #210, #215, #220) for a custom control panel of any size.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWire each switch inline with one rail of a track block, isolating that block from power when the switch is off.\u003c\/li\u003e\n\u003cli\u003eOr wire each switch in series with an accessory (building light, signal bridge, structure) for individual on\/off control.\u003c\/li\u003e\n\u003cli\u003eCouple side-by-side with other Atlas Connector boxes to build modular control panels.\u003c\/li\u003e\n\u003cli\u003eUse 18-22 AWG hookup wire and Atlas #201 spade connectors at the screw terminals for fast hookup.\u003c\/li\u003e\n\u003cli\u003ePower capacity is ample for any DC track block or accessory at typical model-railroad voltages (under 16 V).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e All scales \/ Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Control Box — 3× SPST On\/Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e 3 (independent SPST)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096851996854,"sku":"150-205","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_aaa809f9-a09d-4c56-8a02-8498bfbe95aa.jpg?v=1777494429"},{"product_id":"atlas-2065-n-scale-code-55-turnout-under-table-switch-machine-new","title":"Atlas 2065 N Scale Code 55 Turnout Under Table Switch Machine","description":"\u003cp\u003eThe Atlas #2065 is the under-table switch machine designed specifically for Atlas N Code 55 turnouts — letting you throw turnouts remotely from a control panel instead of finger-throwing them by hand. Mounts under the layout, with a vertical actuator that engages the turnout's throw bar through a small hole in the roadbed.\u003c\/p\u003e\u003cp\u003eSolenoid-style switch machine with built-in twin coils — pulse one coil to throw, the other to throw back. Operates on standard 12-16V AC accessory power.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts under the table directly below an Atlas Code 55 turnout — drill a small hole through the roadbed for the actuator pin.\u003c\/li\u003e\n\u003cli\u003eWire each machine to a momentary push-button (e.g. Atlas #56 Controller, Capacitor Discharge Unit) — do not use continuous power.\u003c\/li\u003e\n\u003cli\u003ePower from a 12-16V AC accessory transformer tap, NOT from track DC power.\u003c\/li\u003e\n\u003cli\u003ePair with Atlas #201 spade connectors for fast solderless hookup to the controller.\u003c\/li\u003e\n\u003cli\u003eCompatible with Atlas Code 55 turnouts #2050, #2051, #2052, #2053, #2054, #2055, #2056, #2057, #2058.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Under-Table Switch Machine (Twin-Coil Solenoid)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC (momentary pulse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e Atlas Code 55 Turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2065\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862023862,"sku":"150-2065","price":30.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_0719869c-f48a-44ce-81f6-3e60c2776497.png?v=1777495694"},{"product_id":"atlas-2091-n-scale-code-55-insulated-rail-joiners-24pcs","title":"Atlas 2091 N Scale Code 55 Insulated Rail Joiners 24pcs","description":"\u003cp\u003eThe Atlas #2091 is a 24-pack of insulated rail joiners for Atlas N Code 55 track. They look identical to regular rail joiners but are molded from non-conductive plastic — electrically isolating one section of rail from the next, which is essential for block-power wiring, frog isolation on turnouts, and DCC reverse-loop boundaries.\u003c\/p\u003e\u003cp\u003e24 pieces per pack. Black plastic, fits the same concealed-joiner profile as regular Atlas Code 55 metal joiners.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse to break a track section into electrically isolated blocks for cab-control DC wiring.\u003c\/li\u003e\n\u003cli\u003eInstall both rails at any DCC reverse-loop or wye boundary to define the auto-reverse zone.\u003c\/li\u003e\n\u003cli\u003eUse to isolate turnout frogs for live-frog\/dead-frog wiring options.\u003c\/li\u003e\n\u003cli\u003eSlot in like a regular joiner — no soldering or tools needed.\u003c\/li\u003e\n\u003cli\u003eCompatible with all Atlas Code 55 N track and turnouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Insulated Rail Joiners (Plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 24 pieces \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2091\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862351542,"sku":"150-2091","price":4.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_5c4fbafd-696c-4d6b-831b-a1ed6eecd7cf.jpg?v=1777495714"},{"product_id":"atlas-2092-n-scale-code-55-terminal-joiners-power-feed-1-pair","title":"Atlas 2092 N Scale Code 55 Terminal Joiners \/ Power Feed - 1 Pair","description":"\u003cp\u003eThe Atlas #2092 is a pair of terminal joiners for Atlas N Code 55 track — rail joiners with a short wire feeder pre-attached, used to deliver power from a bus or pack to the rails without having to solder a feeder onto the rail web yourself.\u003c\/p\u003e\u003cp\u003e1 pair per pack (one for each rail). Pre-attached wire leads ready to connect to a controller, bus wire, or DCC booster output.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall one pair at the power-input point of each track block — slides in like a regular joiner.\u003c\/li\u003e\n\u003cli\u003eCrimp Atlas #201 spade connectors onto the wire ends for fast hookup at the controller or bus terminal.\u003c\/li\u003e\n\u003cli\u003eFor DCC operation, install multiple pairs every 6-8 feet of track to avoid voltage drop.\u003c\/li\u003e\n\u003cli\u003ePlug-and-play alternative to soldering feeders directly to the rail web.\u003c\/li\u003e\n\u003cli\u003eCompatible with all Atlas Code 55 N track and turnouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Terminal Joiners \/ Power Feed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2092\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862417078,"sku":"150-2092","price":6.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3b5499ae-b2f5-4772-8050-cb353e8ac060.jpg?v=1779570905"},{"product_id":"atlas-210-twin-control-switches-new","title":"Atlas 210 Twin Control Switches","description":"\u003cp\u003eThe Atlas #210 Twin is a classic Atlas wiring control unit — a pair of internally cross-wired DPDT (double-pole, double-throw) switches that gives you independent polarity control at two pairs of output terminals. Designed for cab control of reverse loops, wyes, turntables, and short reversing sections on DC-powered model railroads.\u003c\/p\u003e\u003cp\u003eThe Twin is part of Atlas's long-running Selector \/ Controller \/ Twin family of analog wiring blocks. Multiple Twins can be ganged together with the included double-edged jumper connectors — no extra wiring required between units. The screw-terminal housing accepts #3-48 screws and is fully compatible with Atlas spade-tongue solderless connectors for fast hookup.\u003c\/p\u003e\u003cp\u003eWhile the Twin is fundamentally a DC analog accessory, modellers running DCC frequently use it as a manual polarity switch on small reversing sections where an auto-reverser would be overkill.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Cab Control \/ Reverse-Loop Switch (Twin DPDT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Reverse loops · wyes · turntable polarity · double-track polarity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw + spade (Atlas #201 connectors recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouples with:\u003c\/strong\u003e Atlas #215 Selector, #220 Controller via included jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 210\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862482614,"sku":"150-210","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_09f4a68a-32bd-4b44-b912-1fca26731f67.png?v=1777495724"},{"product_id":"atlas-215-selector-control-switches-new","title":"Atlas 215 Selector Control Switches","description":"\u003cp\u003eThe Atlas #215 Selector is the classic Atlas 2-cab \/ 4-block wiring control unit — four single-pole, double-throw (SPDT) switches that let you independently route either of two cabs to any of four track blocks on a DC-powered model railroad.\u003c\/p\u003e\u003cp\u003eSelectors can be ganged together in any number with the included double-edged jumper connectors, expanding cab control to as many blocks as your layout requires; they can also be wired as area selectors for four-cab operation. Pair with the #220 Controller for reverse-loop, wye, and turntable polarity reversal.\u003c\/p\u003e\u003cp\u003eThe Selector remains one of the simplest, most reliable ways to wire up multi-cab DC operation — and many DCC modellers still use it for shop-track power isolation and progressive train staging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Cab \/ Block Selector (4× SPDT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabs \/ Blocks:\u003c\/strong\u003e 2-cab × 4-block per unit; ganged for more\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw + spade (Atlas #201 connectors recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouples with:\u003c\/strong\u003e Atlas #220 Controller, #210 Twin via included jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 215\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862548150,"sku":"150-215","price":17.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ea8c57b2-611c-433b-af47-adc70d0055ab.jpg?v=1777495729"},{"product_id":"atlas-220-controller-control-switches-new","title":"Atlas 220 Controller Control Switches","description":"\u003cp\u003eThe Atlas #220 Controller is the reversing companion to the #215 Selector — a wiring unit with two cab DPDT polarity reversers plus a switchable reverse-section block that either cab can take control of. The simplest way to wire and operate reverse loops, wyes, and turntables on a DC-powered cab-control layout.\u003c\/p\u003e\u003cp\u003eCouples directly with #215 Selectors (and with #210 Twins) using the included double-edged jumper connectors — no inter-unit wiring required. The two mainline reversers swap polarity of an entire cab feed; the reverse-section switch lets either cab take and reverse a tricky section without breaking train flow.\u003c\/p\u003e\u003cp\u003eLike all Atlas wiring components, the Controller predates DCC but remains the go-to manual reverse-loop solution where an automatic reverser isn't warranted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-Cab Polarity \/ Reverse-Section Controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e 2× DPDT cab polarity + 1× cab-selectable reverse section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw + spade (Atlas #201 connectors recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouples with:\u003c\/strong\u003e Atlas #210 Twin, #215 Selector via included jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 220\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862613686,"sku":"150-220","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_12f28756-8079-4d95-a764-8e22d8863f2a.jpg?v=1777495733"},{"product_id":"atlas-22056-n-scale-70-ton-roller-bearing-trucks-with-accumate-knuckle-couplers","title":"Atlas 22056 N Scale 70-Ton Roller-Bearing Trucks with Accumate Knuckle Couplers","description":"\u003cp\u003eThe Atlas #22056 is a pair of N scale 70-ton roller-bearing freight-car trucks with Accumate® knuckle couplers pre-installed — a direct replacement \/ upgrade for trucks fitted to Atlas, Atlas Trainman, and many third-party N scale rolling stock.\u003c\/p\u003e\u003cp\u003eThe 70-ton roller-bearing sideframe is the standard truck on most modern (1960s+) North American boxcars, hoppers, gondolas, and tank cars. Accumate® couplers are body-shape compatible with Micro-Trains® Magne-Matic® and standard NMRA Type-E knuckle couplers; they self-center, accept magnetic uncoupling, and are factory-mounted at the correct height.\u003c\/p\u003e\u003cp\u003eSlippery engineering-plastic sideframes and needle-point axles run smoothly without lubrication. Sold 1 pair per pack — equips one freight car.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 70-Ton Roller-Bearing Trucks with Accumate® knuckle couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack (equips 1 car)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Atlas, Trainman, and most N scale freight cars; Accumate® \/ Micro-Trains® \/ NMRA Type-E coupler-compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22056\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862711990,"sku":"150-22056","price":6.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b3cd6442-7305-4264-8e3f-de0da40ca843.gif?v=1777495738"},{"product_id":"atlas-22060-n-scale-roller-bearing-caboose-trucks-1-pair","title":"Atlas 22060 N Scale Roller Bearing Caboose Trucks - 1 Pair","description":"\u003cp\u003eThe Atlas #22060 is a pair of N scale roller-bearing caboose trucks — sized and detailed specifically for the longer wheelbase and ride-control geometry of cabooses, designed to drop into Atlas N scale cabooses and most other N caboose models.\u003c\/p\u003e\u003cp\u003eSideframes are scale roller-bearing castings appropriate to modern (post-1965) caboose service. Slippery engineering-plastic sideframes ride on needle-point axles and don't require lubrication; supplied without couplers so you can fit body-mounted Accumate® or Micro-Trains® couplers as preferred.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Caboose Trucks (roller-bearing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack (equips 1 caboose)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouplers:\u003c\/strong\u003e Not included (body-mount your own)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862777526,"sku":"150-22060","price":5.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b1516b03-119b-48f8-8dcb-efb1b48c9937.jpg?v=1777495743"},{"product_id":"atlas-22071-n-scale-talgo-type-freight-car-trucks-with-accumate-knuckle-coupler","title":"Atlas 22071 N Scale Talgo-Type Freight Car Trucks with Accumate Knuckle Coupler","description":"\u003cp\u003eThe Atlas #22071 is a pair of N scale Talgo-type freight-car trucks with Accumate® knuckle couplers pre-attached to the truck sideframe — the original-style truck-mounted-coupler design used on Atlas N scale rolling stock since the 1990s.\u003c\/p\u003e\u003cp\u003eTruck-mounted (Talgo) couplers swing with the truck through tight curves, helping shorter cars stay coupled around N scale's typical 9¾\" \/ 11\" radii. The Accumate® coupler is body-shape compatible with Micro-Trains® Magne-Matic® and NMRA Type-E knuckle couplers, accepts magnetic uncoupling, and is factory-mounted at the correct height.\u003c\/p\u003e\u003cp\u003eSlippery engineering-plastic sideframes and needle-point axles run smoothly without lubrication. Direct swap-in for any Atlas \/ Atlas Trainman N scale freight car using truck-mounted couplers; available in several sideframe styles to match your prototype.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Talgo-Type (truck-mount) Trucks with Accumate® knuckle couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack (equips 1 car)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Atlas \/ Trainman N rolling stock; Accumate® \/ Micro-Trains® \/ NMRA Type-E coupler-compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22071\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862843062,"sku":"150-22071","price":9.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_15d873be-b1a4-4435-9e0d-d5cdd1ebcaa2.jpg?v=1779570965"},{"product_id":"atlas-22076-n-scale-talgo-type-freight-car-trucks-with-accumate-knuckle-coupler","title":"Atlas 22076 N Scale Talgo-Type Freight Car Trucks with Accumate Knuckle Coupler","description":"\u003cp\u003eThe Atlas #22076 is a pair of N scale Talgo-type freight-car trucks with Accumate® knuckle couplers, sideframes detailed for the 70-ton roller-bearing prototype most common on modern North American freight equipment.\u003c\/p\u003e\u003cp\u003eTalgo (truck-mounted) couplers swing with the truck through tight curves, helping shorter cars track reliably around N scale's typical 9¾\" \/ 11\" radii. Accumate® is body-shape compatible with Micro-Trains® Magne-Matic® and NMRA Type-E knuckle couplers and accepts magnetic uncoupling at standard track height.\u003c\/p\u003e\u003cp\u003eDrop-in replacement for any Atlas \/ Atlas Trainman N scale freight car using truck-mount couplers. Engineering-plastic sideframes ride on needle-point axles — no lubrication required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 70-Ton Roller-Bearing Talgo Trucks with Accumate® knuckle couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack (equips 1 car)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Atlas \/ Trainman N rolling stock; Accumate® \/ Micro-Trains® \/ NMRA Type-E coupler-compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22076\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862908598,"sku":"150-22076","price":9.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_50a36bc5-c4d0-4c88-8965-6cbbcaf698c4.jpg?v=1777495754"},{"product_id":"atlas-22081-n-scale-talgo-type-freight-car-trucks-with-accumate-knuckle-coupler","title":"Atlas 22081 N Scale Talgo-Type Freight Car Trucks with Accumate Knuckle Coupler","description":"\u003cp\u003eThe Atlas #22081 is a pair of N scale Talgo-type 70-ton roller-bearing trucks with Accumate® knuckle couplers and an extended bolster — designed for cars whose body or sill clearance requires a taller truck-to-floor mounting offset than the standard #22076.\u003c\/p\u003e\u003cp\u003eThe extended bolster raises the car body relative to the truck centreplate, fixing the “too-low” stance you sometimes get when swapping factory trucks on cylindrical hoppers, tank cars, and certain deep-sill freight equipment. Truck-mounted Accumate® couplers swing with the truck on tight curves and are body-shape compatible with Micro-Trains® Magne-Matic® and NMRA Type-E.\u003c\/p\u003e\u003cp\u003eEngineering-plastic sideframes and needle-point axles — no lubrication required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 70-Ton Roller-Bearing Talgo Trucks, Extended Bolster, with Accumate® couplers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack (equips 1 car)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Replacement for cars needing extra body-to-truck clearance (cyl. hoppers, tanks, deep-sill cars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22081\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862974134,"sku":"150-22081","price":7.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_091b99ed-ca59-4070-8519-007a04fbf563.jpg?v=1777495759"},{"product_id":"atlas-22134-n-scale-33-low-profile-replacement-wheelsets-for-micro-trains-24pcs","title":"Atlas 22134 N Scale 33\" Low Profile Replacement Wheelsets For Micro-Trains 24pcs","description":"\u003cp\u003eThe Atlas #22134 is a 24-piece pack of N scale 33\" low-profile blackened metal wheelsets sized to drop into Micro-Trains® freight-car trucks (and other N trucks using the same axle length).\u003c\/p\u003e\u003cp\u003e33\" wheels are the standard prototype size for most North American freight cars built since the 1950s. Low-profile flanges are designed for finer track such as Atlas Code 55 and Micro Engineering Code 55 \/ Code 40 — they clear the closer-spaced detail spike heads while still safely tracking on Code 80 \/ Code 100. Blackened metal tread reduces glare under layout lighting and improves electrical conductivity for lighted cars.\u003c\/p\u003e\u003cp\u003e24 wheels per pack equips 6 trucks \/ 3 cars. Replaces plastic-wheel sets supplied by Micro-Trains and many Atlas N freight cars; needle-point axle ends ride smoothly without lubrication.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 33\" Low-Profile Blackened Metal Wheelsets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 24 wheels \/ pack (6 trucks \/ 3 cars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Micro-Trains® and most Atlas \/ Atlas Trainman N freight trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack suitable:\u003c\/strong\u003e Code 40 \/ 55 \/ 80 \/ 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22134\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096863039670,"sku":"150-22134","price":7.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_2793eb6a-46da-4166-bc81-ce11fa3e15e0.jpg?v=1777495763"},{"product_id":"atlas-22135-n-scale-33-low-profile-micro-trains-wheelsets-48pcs","title":"Atlas 22135 N Scale 33\" Low Profile Micro Trains Wheelsets - 48pcs","description":"\u003cp\u003eThe Atlas #22135 is a 48-piece pack of N scale 33\" low-profile blackened metal wheelsets sized to drop into Micro-Trains® freight-car trucks (and other N trucks using the same axle length).\u003c\/p\u003e\u003cp\u003e33\" wheels are the standard prototype size for most North American freight cars built since the 1950s. Low-profile flanges are designed for finer track such as Atlas Code 55 and Micro Engineering Code 55 \/ Code 40 — they clear the closer-spaced detail spike heads while still safely tracking on Code 80 \/ Code 100. Blackened metal tread reduces glare under layout lighting and improves electrical conductivity for lighted cars.\u003c\/p\u003e\u003cp\u003e48 wheels per pack equips 12 trucks \/ 6 cars. Replaces plastic-wheel sets supplied by Micro-Trains and many Atlas N freight cars; needle-point axle ends ride smoothly without lubrication.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 33\" Low-Profile Blackened Metal Wheelsets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 48 wheels \/ pack (12 trucks \/ 6 cars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Micro-Trains® and most Atlas \/ Atlas Trainman N freight trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack suitable:\u003c\/strong\u003e Code 40 \/ 55 \/ 80 \/ 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22135\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096863105206,"sku":"150-22135","price":15.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_5371e8b1-c514-4b72-9a03-6c6f7bc15d32.jpg?v=1779570966"},{"product_id":"atlas-22136-n-scale-33-low-profile-micro-trains-wheelsets-100pcs","title":"Atlas 22136 N Scale 33\" Low Profile Micro Trains Wheelsets - 100pcs","description":"\u003cp\u003eThe Atlas #22136 is a 100-piece pack of N scale 33\" low-profile blackened metal wheelsets sized to drop into Micro-Trains® freight-car trucks (and other N trucks using the same axle length).\u003c\/p\u003e\u003cp\u003e33\" wheels are the standard prototype size for most North American freight cars built since the 1950s. Low-profile flanges are designed for finer track such as Atlas Code 55 and Micro Engineering Code 55 \/ Code 40 — they clear the closer-spaced detail spike heads while still safely tracking on Code 80 \/ Code 100. Blackened metal tread reduces glare under layout lighting and improves electrical conductivity for lighted cars.\u003c\/p\u003e\u003cp\u003e100 wheels per pack equips 25 trucks \/ ~12 cars. Replaces plastic-wheel sets supplied by Micro-Trains and many Atlas N freight cars; needle-point axle ends ride smoothly without lubrication.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 33\" Low-Profile Blackened Metal Wheelsets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100 wheels \/ pack (25 trucks \/ ~12 cars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Micro-Trains® and most Atlas \/ Atlas Trainman N freight trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack suitable:\u003c\/strong\u003e Code 40 \/ 55 \/ 80 \/ 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 22136\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096863170742,"sku":"150-22136","price":24.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_5413f8c7-0d84-415a-8335-259191cadb20.jpg?v=1779570905"},{"product_id":"atlas-2538-n-scale-code-80-insulated-plastic-rail-joiners-24pcs","title":"Atlas 2538 N Scale Code 80 Insulated Plastic Rail Joiners - 24pcs","description":"\u003cp\u003eThe Atlas #2538 is a 24-pack of Atlas N scale Code 80 insulated plastic rail joiners — direct slide-on replacements for standard metal rail joiners, used to electrically isolate one rail or section from the next.\u003c\/p\u003e\u003cp\u003eInsulated joiners are essential for cab-control block boundaries, DCC reverse-loop section breaks, and isolating signal-detection blocks. They install identically to metal joiners — no cutting or filing required — and the plastic body keeps the rail ends in mechanical alignment while preventing electrical continuity.\u003c\/p\u003e\u003cp\u003eCompatible with all Atlas N Code 80 Snap-Track and Super-Flex.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Insulated Plastic Rail Joiners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 24 \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Block boundaries, DCC reverse-loop gaps, signal detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2538\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864579766,"sku":"150-2538","price":4.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_933b06bf-83c9-4d35-862d-b919ff734cbe.jpg?v=1777495849"},{"product_id":"atlas-2539-n-scale-code-80-power-feed-terminal-rail-joiners-1-pair","title":"Atlas 2539 N Scale Code 80 Power Feed \/ Terminal Rail Joiners - 1 Pair","description":"\u003cp\u003eThe Atlas #2539 is a pair of Atlas N scale Code 80 terminal rail joiners — standard metal rail joiners with a short pre-soldered wire feeder, used to deliver power from a controller or DCC bus to the rails without having to solder a feeder onto the rail web yourself.\u003c\/p\u003e\u003cp\u003eSold 1 pair per pack (one for each rail). Pre-attached leads ready to crimp Atlas #201 spade connectors onto for fast hookup at the controller or bus terminal. For DCC operation, install multiple pairs every 6–8 feet of track to avoid voltage drop.\u003c\/p\u003e\u003cp\u003ePlug-and-play alternative to soldering feeders directly to the rail. Compatible with all Atlas N Code 80 Snap-Track, Super-Flex, and turnouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Terminal Joiners \/ Power Feed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2539\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864678070,"sku":"150-2539","price":7.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_6aa2bf05-5f12-499c-b0c3-36d86f0fd1c3.jpg?v=1777495854"},{"product_id":"atlas-2540-ho-n-scale-track-nails-19-1-2-long","title":"Atlas 2540 N Scale HO\/ Track Nails #19 1\/2\" Long","description":"\u003cp\u003eThe Atlas #2540 is a 2 oz (56.7 g) pack of Atlas track nails — #19 gauge blackened steel, 1\/2\" long, with a small round head sized to drop neatly into the pre-drilled tie holes on Atlas N and HO scale flex track.\u003c\/p\u003e\u003cp\u003eThe blackened finish disappears against weathered ties; the small round head won't fight ballast or scenic detail; and the half-inch length is the right depth for nailing flex through cork or foam roadbed into a plywood \/ homasote subroadbed without coming out the other side.\u003c\/p\u003e\u003cp\u003eUse a small hammer or push-pin driver — never over-drive or you'll bow the rail gauge. Compatible with Atlas, Micro Engineering, Peco and most other manufacturers' N and HO flex track.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N and HO (compatible with both)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Track Nails, #19 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1\/2\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Blackened steel, round head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 oz (56.7 g) per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2540\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864743606,"sku":"150-2540","price":8.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a41e5b37-157e-4d3b-9df3-a707d5369d78.jpg?v=1777495860"},{"product_id":"atlas-2541-n-scale-graduated-pier-set-snap-fit-for-mountain-atlas-track-25pcs","title":"Atlas 2541 N Scale Graduated Pier Set Snap Fit for Mountain Atlas Track - 25pcs","description":"\u003cp\u003eThe Atlas #2541 is a 25-piece graduated pier set for Atlas N scale layouts — twelve precisely-graduated concrete pier heights (two of each, 9\/64\" through 1-11\/16\" in 9\/64\" increments) plus one #2542 Straight Pier Girder, all designed to snap together with Atlas N Snap-Track to build the gentle ramp leading up to and away from a bridge or elevated section.\u003c\/p\u003e\u003cp\u003eSpaced at the standard 5\" pier interval, the graduated heights produce a 2.8% grade — the natural choice for “easy grade” on N, and a workable maximum for most N scale equipment. The included girder lets you continue level once you've reached the top of the climb.\u003c\/p\u003e\u003cp\u003eThe pier feet are sized to fit Atlas Snap-Track sections without modification. Add #2542 girders or Atlas's separate concrete piers (#2543) to extend the level run as long as you need.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Graduated Concrete Pier Set + Girder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePier heights:\u003c\/strong\u003e 9\/64\" → 1-11\/16\" (12 heights, 2 each)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e 2.8% at 5\" pier spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 24 piers + 1 #2542 girder = 25 pcs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2541\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864809142,"sku":"150-2541","price":22.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c29871cf-ccd9-423c-b72d-d6419fce5938.jpg?v=1779571085"},{"product_id":"atlas-2542-n-scale-bridge-pier-girders-4pcs","title":"Atlas 2542 N Scale Bridge Pier Girders - 4pcs","description":"\u003cp\u003eThe Atlas #2542 is a 4-pack of N scale plate-girder bridge piers — short straight-track-length spans designed to sit on Atlas concrete piers (#2541 \/ #2543) and support snap-together level running between graduated pier ramps.\u003c\/p\u003e\u003cp\u003eSnap any of Atlas's N scale bridges and pier girders together for a multi-span elevated structure — the modular system lets you span gorges, rivers, and yards in any combination of bridge styles and lengths. The Pier Girder integrates visually with Atlas plate-girder bridges and is the right answer when you need length without another full bridge.\u003c\/p\u003e\u003cp\u003e4 girders per pack — enough to extend a typical bridge run by ~24\" or to fill in between two separate bridges.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Plate-Girder Bridge Pier (straight span)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed with:\u003c\/strong\u003e Atlas N concrete piers (#2541 \/ #2543) and Atlas N bridges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2542\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864907446,"sku":"150-2542","price":7.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_160a0b3e-7276-436a-ac7e-591a4c11825d.jpg?v=1777495870"},{"product_id":"atlas-2543-n-scale-bridge-piers-3pcs","title":"Atlas 2543 N Scale Bridge Piers - 3pcs","description":"\u003cp\u003eMulti-span bridge installations need consistent pier heights, and Atlas's #2543 add-on set lets you extend any Atlas N scale bridge layout by three matching 1-11\/16\" (43 mm) tall piers. The height matches the tallest piers in the master #2541 pier set, so you can build longer scenes — viaducts, river crossings, valley spans — without mixing parts from different ranges.\u003c\/p\u003e\u003cp\u003eEach pack contains three identical piers. Cast in styrene with crisp masonry\/concrete detail, they snap or glue to a layout base and accept any Atlas N Code 80 bridge: Warren truss (#2546), Deck truss (#2547), Plate Girder (#2548), or the 10\" Through Truss (#2570\/#2571). Pier spacing of 5\" between centers gives an authentic-looking span\/pier ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse as add-on piers to extend a layout that already uses the #2541 12-pier graduated set + #2542 girder beam.\u003c\/li\u003e\n\u003cli\u003eSpace piers 5\" apart center-to-center to match the standard 5\" bridge sections (#2546\/#2547\/#2548).\u003c\/li\u003e\n\u003cli\u003eCombine three piers + one 10\" Through Truss (#2570 or #2571) for a single-span river crossing scene.\u003c\/li\u003e\n\u003cli\u003eGlue with plastic cement or attach with 5-minute epoxy to a foam or plywood base before scenicking around them.\u003c\/li\u003e\n\u003cli\u003ePaint with a wash of grey\/black for weathered concrete, or leave moulded color for as-shipped grey concrete look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1-11\/16\" (43 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 3 piers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bridge Pier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2543\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864972982,"sku":"150-2543","price":7.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bee5e741-d13a-4d53-aecd-9fc0f55fb16e.jpg?v=1777495875"},{"product_id":"atlas-2090-n-scale-code-55-rail-joiners-24pcs","title":"Atlas 2090 N Scale Code 55 Rail Joiners - 24pcs","description":"\u003cp\u003eRail joiners are the small metal clips that hold two pieces of track together mechanically and pass electrical current between them. The Atlas #2090 pack contains 24 nickel-silver joiners sized specifically for Code 55 N scale rail — the small profile lets them slip over the rail base without bulging visibly above the tie line.\u003c\/p\u003e\u003cp\u003eUse these whenever connecting Atlas Code 55 flex track, sectional pieces, or turnouts to one another. Slip one joiner half over the base of each adjoining rail, then push the two pieces together with the joiner spanning the joint. Press flush with the ties for an unobtrusive joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSlip onto rail base with needle-nose pliers or by hand — do not crimp the joiner shut, snug fit is enough.\u003c\/li\u003e\n\u003cli\u003eFor permanent installations, solder a feeder wire to the joiner before installing, then drop the wire through a tie hole to your bus wire.\u003c\/li\u003e\n\u003cli\u003eUse Atlas #2091 insulated rail joiners instead of these wherever you need to electrically isolate one section (reverse loops, frog feeders, block boundaries).\u003c\/li\u003e\n\u003cli\u003eCode 55 only — they're too small to fit Code 80 rail. For Code 80 use #2535 (48pc nickel-silver) or #2536 (insulated).\u003c\/li\u003e\n\u003cli\u003e24 pieces per pack supports about 12 rail joints, enough for one circle of flex track or 3-4 turnouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Rail Joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel-Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 24 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2090\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096865431734,"sku":"150-2090","price":6.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_05f84976-9353-456a-9774-4970b7f4d797.jpg?v=1779571146"},{"product_id":"atlas-2535-n-scale-code-80-nickel-silver-rail-joiners-48pcs","title":"Atlas 2535 N Scale Code 80 Nickel Silver Rail Joiners - 48pcs","description":"\u003cp\u003eRail joiners hold two pieces of track together mechanically and conduct power between them. The Atlas #2535 pack contains 48 nickel-silver joiners sized for Code 80 N scale rail — the standard joiner for any Atlas N Code 80 layout (Snap-Track, Custom-Line, or Super-Flex).\u003c\/p\u003e\u003cp\u003eUse these whenever joining Code 80 flex track, sectional pieces, turnouts, or crossings. The 48-piece count supports a substantial layout — about 24 rail joints, enough for a moderate-sized oval with sidings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSlip onto rail base by hand or with needle-nose pliers — do not crimp shut, snug fit is enough.\u003c\/li\u003e\n\u003cli\u003eSolder a feeder wire to the joiner before installing for a permanent power-feed point.\u003c\/li\u003e\n\u003cli\u003eUse Atlas #2538 (insulated) instead wherever you need to electrically isolate a section (reverse loops, block boundaries, frog feeds).\u003c\/li\u003e\n\u003cli\u003eCode 80 only — do not use on Code 55 (use #2090 for Code 55 instead).\u003c\/li\u003e\n\u003cli\u003ePair with Atlas #2539 power-feed joiners to combine mechanical join + power feed in one piece at chosen feeder points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Rail Joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel-Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 48 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2535\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096865595574,"sku":"150-2535","price":6.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_2a169064-81e8-40da-8165-63da31c376e1.jpg?v=1777495916"},{"product_id":"atlas-2590-n-scale-left-remote-switch-machine","title":"Atlas 2590 N Scale Left Remote Switch Machine","description":"\u003cp\u003eThe Atlas #2590 is a left-hand remote switch machine for Atlas N Standard-Line turnouts — a separate AC twin-coil solenoid unit that mounts beside the turnout and pulls the points electrically when you press a control panel button. (Note: this is NOT a DCC accessory in itself; it's a conventional AC twin-coil solenoid. It can be driven by a DCC accessory decoder like the Digitrax DS64, but works out of the box with a standard AC accessory tap and momentary push-button.)\u003c\/p\u003e\u003cp\u003eWire the three machine leads — one common, two directional — to an Atlas #56 Controller or any momentary push-button setup that delivers a brief AC pulse (12-16V from your transformer's accessory tap). The switch machine is designed specifically for Atlas N Standard-Line turnouts — it bolts on to the tie strip and pulls the points via a small lever arm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower from a 12-16V AC accessory tap — do not use continuous DC, the coils will overheat.\u003c\/li\u003e\n\u003cli\u003eUse only momentary push-button control — Atlas #56 controller is the standard, or wire your own SPST momentary buttons.\u003c\/li\u003e\n\u003cli\u003eWire common to one terminal of the controller, the two directional leads to the throw and reverse buttons.\u003c\/li\u003e\n\u003cli\u003eTo convert a manual Atlas turnout to remote: remove the manual lever, screw on the #2590 (LH) or #2591 (RH) machine.\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (e.g. Digitrax DS64, NCE Switch-It) for digital control — wire the decoder's pulse outputs to the machine's three leads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2590\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096970715318,"sku":"150-2590","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bc7861ed-cf42-47ed-8bc8-b93705cfcfc0.jpg?v=1777508841"},{"product_id":"atlas-2591-n-scale-right-remote-switch-machine","title":"Atlas 2591 N Scale Right Remote Switch Machine","description":"\u003cp\u003eThe Atlas #2591 is the right-hand companion to the #2590 — an AC twin-coil remote switch machine for Atlas N Standard-Line right-hand turnouts. (Note: this is NOT a DCC accessory in itself despite the product category; it's a conventional AC twin-coil solenoid driven by an accessory-tap pulse. It can be controlled by a DCC accessory decoder like the Digitrax DS64.)\u003c\/p\u003e\u003cp\u003eWire the three leads — common plus two directional — to an Atlas #56 Controller or any momentary AC pulse source (12-16V from accessory tap). Bolts to the tie strip of any Atlas N Standard-Line right-hand turnout and pulls the points electrically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower from 12-16V AC accessory tap — never continuous DC (coils will burn out).\u003c\/li\u003e\n\u003cli\u003eUse only momentary push-button control — Atlas #56 controller standard, or build your own with SPST momentary buttons.\u003c\/li\u003e\n\u003cli\u003eWire common to one terminal of the controller, the two directional leads to throw\/reverse buttons.\u003c\/li\u003e\n\u003cli\u003ePair with #2590 for the left-hand version on facing-point yard ladders.\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (Digitrax DS64, NCE Switch-It) for digital layout control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2591\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096970813622,"sku":"150-2591","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ddf0f000-43c1-4c90-9dba-95d6cacb2aed.jpg?v=1777508846"},{"product_id":"atlas-2715-n-scale-code-80-lh-left-hand-remote-switch-machine-new","title":"Atlas 2715 N Scale Code 80 LH Left Hand Remote Switch Machine","description":"\u003cp\u003eThe Atlas #2715 is a left-hand standalone remote switch machine designed to screw onto Atlas N Code 80 #2700-series turnouts — converts manually-thrown turnouts (#2706, #2709) to remote operation, or replaces a damaged integrated machine on a remote turnout (#2704, #2708). (Note: this is NOT a DCC accessory in itself; it's a conventional AC twin-coil solenoid. It CAN be driven by a DCC accessory decoder like the Digitrax DS64, but works directly with AC accessory power.)\u003c\/p\u003e\u003cp\u003eTwin-coil AC solenoid (12-16V AC accessory tap, momentary pulse). Two screws attach the machine body to the turnout's tie strip, and a small lever arm engages the points throw bar. Wire the three leads (one common, two directional) to an Atlas #56 Controller or any momentary push-button setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScrew to the tie strip of an Atlas Code 80 #2706 (LH manual) or #2709 (Wye manual) turnout, replacing the manual lever.\u003c\/li\u003e\n\u003cli\u003eWire the three leads to an Atlas #56 Controller or any momentary AC pulse source.\u003c\/li\u003e\n\u003cli\u003ePower from 12-16V AC accessory tap — never continuous DC.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for #2700-series turnouts — won't fit #2750-series Custom-Line turnouts (use #65 under-table machine for Custom-Line).\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (Digitrax DS64, NCE Switch-It) for digital control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine (Standalone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Atlas #2700-series Code 80 turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2715\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096971305142,"sku":"150-2715","price":22.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_44a5ece1-0b86-42ff-bede-b327fd8a7406.jpg?v=1779570845"},{"product_id":"atlas-2716-n-scale-code-80-rh-right-hand-remote-switch-machine-new","title":"Atlas 2716 N Scale Code 80 RH Right Hand Remote Switch Machine","description":"\u003cp\u003eThe right-hand companion to the #2715 — a standalone AC twin-coil switch machine designed to screw onto Atlas N Code 80 #2700-series right-hand turnouts. Converts a manual #2707 to remote operation or replaces a damaged integrated machine on a #2705 remote turnout. (Note: this is NOT a DCC accessory in itself; it's an AC twin-coil solenoid that CAN be driven by a DCC accessory decoder.)\u003c\/p\u003e\u003cp\u003eTwin-coil AC solenoid (12-16V AC accessory tap, momentary pulse). Two screws attach to the turnout's tie strip; a lever arm engages the throw bar. Wire the three leads to an Atlas #56 Controller or any momentary push-button setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScrew to the tie strip of an Atlas Code 80 #2707 (RH manual) or #2709 (Wye manual) turnout, replacing the manual lever.\u003c\/li\u003e\n\u003cli\u003eWire the three leads to an Atlas #56 Controller or any momentary AC pulse source.\u003c\/li\u003e\n\u003cli\u003ePower from 12-16V AC accessory tap — never continuous DC.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for #2700-series turnouts; won't fit #2750-series Custom-Line.\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (Digitrax DS64, NCE Switch-It).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine (Standalone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Atlas #2700-series Code 80 turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2716\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096971370678,"sku":"150-2716","price":22.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bb8e7aa7-64b4-4666-a826-7a0346a6962b.jpg?v=1779570966"},{"product_id":"atlas-2790-n-scale-turntable-assembled-model-new","title":"Atlas 2790 N Scale Turntable Assembled Model","description":"\u003cp\u003eThe Atlas \u003cstrong\u003e#2790\u003c\/strong\u003e is an N scale \u003cstrong\u003emanually-operated turntable, fully assembled\u003c\/strong\u003e — a 7-1\/2\" diameter (≈22\" prototype) deck with 21 indexed track positions in 15° increments. A Geneva-style indexing mechanism locks the bridge in exact alignment with each radial track every time, eliminating the wheel-stub headaches that come from sloppy hand-aligned turntables.\u003c\/p\u003e\u003cp\u003eThe pit ring is molded in simulated concrete gray; the bridge deck is finished in weathered wood brown. Out of the box it's hand-cranked; add the matching \u003cstrong\u003e#2791 Motor Drive Unit\u003c\/strong\u003e for under-table powered operation.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePre-assembled — drop in to a 7-1\/2\" hole cut in your benchwork. Feed power across the bridge from your DC pack or DCC bus.\u003c\/li\u003e\n\u003cli\u003eThe 15° spacing matches the stall spacing of the Atlas \u003cstrong\u003e#2843\u003c\/strong\u003e N 3-Stall Brick Roundhouse — pair the two for an instant N-scale engine terminal.\u003c\/li\u003e\n\u003cli\u003eAdd Atlas #2791 for motorized operation (gear-driven from under the table).\u003c\/li\u003e\n\u003cli\u003eRail is nickel-silver and accepts Code 80 sectional or flex via standard joiners.\u003c\/li\u003e\n\u003cli\u003eMaximum locomotive length: roughly 6.5\" coupler-to-coupler (most 4-axle road switchers and most 6-axle SD\/Big Boy-class Ns fit).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Assembled turntable, manually-operated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridge diameter:\u003c\/strong\u003e 7-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndexing:\u003c\/strong\u003e 21 positions, 15° increments, Geneva-movement lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible motor drive:\u003c\/strong\u003e #2791 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2790\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096972288182,"sku":"150-2790","price":43.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_df2e01c0-275e-4dd8-8a97-14ebd25a2ade.png?v=1777508922"},{"product_id":"atlas-2791-n-scale-turntable-motor-drive-unit-new","title":"Atlas 2791 N Scale Turntable Motor Drive Unit","description":"\u003cp\u003eThe Atlas \u003cstrong\u003e#2791\u003c\/strong\u003e is the under-table \u003cstrong\u003eMotor Drive Unit\u003c\/strong\u003e that converts the Atlas \u003cstrong\u003e#2790\u003c\/strong\u003e N-scale manual turntable into a powered one. The geared drive mounts directly to the underside of the turntable pit and rotates the bridge between Geneva-lock positions automatically when you pulse 12-16V AC accessory power.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned exclusively for use with the Atlas \u003cstrong\u003e#2790\u003c\/strong\u003e N-scale turntable — not compatible with other turntables.\u003c\/li\u003e\n\u003cli\u003eMounts to the underside of the turntable pit; powered from a 12-16V AC accessory tap (do not feed continuous DC — the motor is intended for momentary AC pulses).\u003c\/li\u003e\n\u003cli\u003eUse a momentary push-button or DPDT center-off switch to step the bridge to the next indexed position (15° per step).\u003c\/li\u003e\n\u003cli\u003eThe factory Geneva indexing mechanism in the #2790 keeps each stop dead-aligned with the radial track.\u003c\/li\u003e\n\u003cli\u003ePair with the Atlas #2843 N 3-Stall Brick Roundhouse for a complete N-scale engine terminal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Under-table motor drive unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible turntable:\u003c\/strong\u003e Atlas #2790 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC accessory, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2791\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096972353718,"sku":"150-2791","price":37.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_78e576f1-d150-495f-a94b-47ddf8b1ef27.jpg?v=1779570845"},{"product_id":"atlas-32552-n-scale-cleaning-head-replacement-set-new","title":"Atlas 32552 N Scale Cleaning Head Replacement Set","description":"\u003cp\u003eThe Atlas \u003cstrong\u003e#32552\u003c\/strong\u003e is the official \u003cstrong\u003ecleaning-head replacement set\u003c\/strong\u003e for the Atlas N-scale Track Cleaning Car. Replace tired pads when they get black with rail oxide and graphite — usually every 6-12 hours of running on a typical layout — to keep the car pulling its weight on the consist.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePop the bottom cover off your Atlas N Track Cleaning Car, lift out the old pad assembly, and drop the fresh head in place.\u003c\/li\u003e\n\u003cli\u003eApply a few drops of Atlas Conducta-Lube, Wahl Clipper Oil, or alcohol to the pad — wet, not dripping — before each run.\u003c\/li\u003e\n\u003cli\u003eRun the cleaning car at the head or tail of a normal consist; the pad scrubs rails as the train moves.\u003c\/li\u003e\n\u003cli\u003ePair with the replacement \u003cstrong\u003e#32553\u003c\/strong\u003e Cleaning Disc set if the car uses the rotating-disc head.\u003c\/li\u003e\n\u003cli\u003eRe-pad every 6-12 running hours, or sooner if you see runs of oxide \/ graphite buildup on the pads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Track-cleaning-car replacement pad \/ head set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Atlas N Track Cleaning Car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 32552\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973992118,"sku":"150-32552","price":25.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_6272701b-2417-4f57-8ae1-f356e4e527a9.jpg?v=1777509025"},{"product_id":"atlas-32553-n-scale-track-cleaning-car-cleaning-disc-replacement-set-new","title":"Atlas 32553 N Scale Track Cleaning Car Cleaning Disc Replacement Set","description":"\u003cp\u003eThe Atlas \u003cstrong\u003e#32553\u003c\/strong\u003e is the official \u003cstrong\u003ecleaning-disc replacement set\u003c\/strong\u003e for the Atlas N-scale Track Cleaning Car. The rotating disc bites into stubborn oxide and graphite that a passive pad can't lift — and like all consumables on a working cleaning car, it needs replacing on a schedule.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove the spent discs from the cleaning-car bottom assembly and snap the fresh ones into place.\u003c\/li\u003e\n\u003cli\u003eUse dry for mechanical scrubbing, or run with a few drops of Wahl Clipper Oil or alcohol for chemical cleaning.\u003c\/li\u003e\n\u003cli\u003eReplace when the disc edge dulls or you see continuous black buildup transferring to the rails.\u003c\/li\u003e\n\u003cli\u003ePair with the \u003cstrong\u003e#32552\u003c\/strong\u003e Cleaning Head replacement set if your car uses both head and disc.\u003c\/li\u003e\n\u003cli\u003eRun the cleaning car at the head or tail of a normal operating consist.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Track-cleaning-car rotating disc replacement set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Atlas N Track Cleaning Car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 32553\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096974123190,"sku":"150-32553","price":11.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_57b53c14-b8e3-4648-8e89-410c4df96527.jpg?v=1779570785"},{"product_id":"atlas-400-modelers-super-saw-new","title":"Atlas 400 Modeler's Super Saw","description":"\u003cp\u003eThe Atlas #400 Modeler's Super Saw is a fine-tooth modeler's hand saw designed for cutting model railroad track (rail and tie strip), styrene, brass, and similar layout-building materials. The thin kerf blade leaves a clean cut with minimal material loss — important when trimming flex track or fitting custom-length sections of code 55 \/ 83 \/ 100 rail.\u003c\/p\u003e\u003cp\u003eDespite the Atlas branding, this is a general-purpose modeler's tool, not a locomotive or rolling stock part. It belongs in the toolbox alongside your rail nipper, point files, and pin vise.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHold the workpiece firmly (a mitre block or vice gives the cleanest cuts).\u003c\/li\u003e\n\u003cli\u003eUse long, smooth strokes — the fine teeth do the cutting; pressure is not required.\u003c\/li\u003e\n\u003cli\u003eFor rail cutting, finish with a fine flat file (or Xuron 9180 track filing kit) to deburr the rail head and webs.\u003c\/li\u003e\n\u003cli\u003eExcellent companion to Atlas's #401 Rail Joiner Sidekick and #402 Track Eraser — a three-piece basic Atlas track-laying toolkit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Modeler's hand saw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Rail, styrene, soft metal, plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Scales:\u003c\/strong\u003e N, HO, O, S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 400\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097006825654,"sku":"150-400","price":7.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_989d4464-cfda-44f4-92c4-ecedcd734d6b.jpg?v=1777513218"},{"product_id":"atlas-401-ho-n-o-scale-rail-joiner-sidekick-tool-new","title":"Atlas 401 O Scale HO, N \u0026 Rail Joiner Sidekick Tool","description":"\u003cp\u003eThe Atlas #401 Rail Joiner Sidekick is a handheld plastic tool that lets you push rail joiners onto rails cleanly and squarely — without bending the joiner, scratching the railhead, or fumbling with tweezers. If you've ever lost a rail joiner under the workbench at midnight, you understand why this exists.\u003c\/p\u003e\u003cp\u003eThe tool works with Atlas rail joiners in \u003cstrong\u003eall three scales — N, HO, and O\u003c\/strong\u003e — and is equally useful for code 55, 70, 80, 83, and 100 rail. Beginners find it makes the first benchwork experience much less frustrating; experienced modelers use it for repetitive joiner installs on large layouts.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlace a rail joiner into the channel on the Sidekick.\u003c\/li\u003e\n\u003cli\u003eAlign with the rail end and push squarely — the tool guides the joiner straight on without bending.\u003c\/li\u003e\n\u003cli\u003eWorks with Atlas Code 100 (#170 joiners), Code 83 (#560), Code 80 N (#2535), Code 55 N (#2090), and similar.\u003c\/li\u003e\n\u003cli\u003ePairs naturally with Atlas #400 Modeler's Super Saw and #402 Track Eraser for a complete basic Atlas track-laying toolkit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Rail joiner installation tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Scales:\u003c\/strong\u003e N, HO, O\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Durable plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 401\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097006891190,"sku":"150-401","price":6.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c75a07b9-82a2-4cd8-96da-6cdef47fdd52.jpg?v=1779571085"},{"product_id":"atlas-402-all-scales-track-eraser-for-track-cleaner-new","title":"Atlas 402 All Scales Track Eraser For Track Cleaner","description":"\u003cp\u003eThe Atlas #402 Track Eraser is an abrasive rubber block that removes oxidation, grease, and grime from the railhead — the leading cause of stalling locomotives and flickering headlights on a model railroad. Rub it along the rails periodically (especially after a long storage gap) and you'll see immediate improvement in electrical pickup.\u003c\/p\u003e\u003cp\u003eThe eraser is safe on all rail materials (nickel silver, brass, steel) and all rail codes. It is a general-purpose cleaning tool — not a locomotive part — and works on N, HO, O, and S scale layouts equally well.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut the bar to a comfortable handheld length with a hobby knife if desired.\u003c\/li\u003e\n\u003cli\u003eRub firmly along the railhead in the direction of the rail; one or two passes is usually enough.\u003c\/li\u003e\n\u003cli\u003eVacuum or brush away the abrasive residue afterward.\u003c\/li\u003e\n\u003cli\u003eFollow up with a CRC 2-26 \/ CMX track-cleaning car \/ Trix Aqua wipe for a fully clean railhead.\u003c\/li\u003e\n\u003cli\u003eUse periodically — once a month for active layouts, before each operating session for layouts that sit between sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Abrasive track-cleaning eraser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Scales:\u003c\/strong\u003e N, HO, O, S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rail:\u003c\/strong\u003e Nickel silver, brass, steel — all codes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 402\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097006956726,"sku":"150-402","price":6.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c157362c-3f0b-4a39-b97f-45d381d547fc.png?v=1779570785"},{"product_id":"atlas-56-all-scale-switch-control-box","title":"Atlas 56 All Scale Switch Control Box","description":"\u003cp\u003eThe Atlas 56 is an all-scale \u003cstrong\u003eSwitch Control Box\u003c\/strong\u003e — a panel-mountable SPDT momentary toggle for controlling twin-coil switch machines (Atlas or any compatible brand). The standard way to bring turnout control to your fascia or control panel without building custom toggle wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works.\u003c\/strong\u003e Each box contains one SPDT (single-pole double-throw) momentary toggle: press in either direction to send a short pulse to one coil of the twin-coil switch machine, throwing the turnout. The toggle's resting position indicates which way the switch is currently set — a built-in visual feedback. Boxes are designed to couple together side-by-side in any number to build a wider control panel, no wiring between them needed. Includes labels so you can mark each toggle with the turnout it controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls.\u003c\/strong\u003e Atlas Snap-Switch remote machines (built into #540\/541\/542\/546), Atlas standalone remote machines (#52\/53\/65\/66\/584\/585), and any twin-coil solenoid switch machine of compatible voltage. Refer to Atlas's Wiring Book for the standard wiring diagram with AC accessory power.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e All\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Control Box (SPDT momentary toggle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Twin-coil switch machines (Atlas + 3rd-party)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 56\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 52\/53\u003c\/strong\u003e — Code 100 LH\/RH remote switch machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 584\/585\u003c\/strong\u003e — Code 83 LH\/RH remote switch machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 540\/541\/546\u003c\/strong\u003e — Snap-Switch remote turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 55\u003c\/strong\u003e — plastic insulated rail joiners for block boundaries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097021079734,"sku":"150-56","price":9.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b5a32f3a-2f92-40d3-ac3d-4c2d363669d1.png?v=1779570546"},{"product_id":"atlas-65-ho-n-scale-code-80-under-table-switch-machine","title":"Atlas 65 HO \u0026 N Scale Code 80 Under-Table Switch Machine","description":"\u003cp\u003eAtlas 65 is the standard under-table twin-coil switch machine — the workhorse remote turnout motor used across two generations of Atlas HO and N scale track. Mounted to the bottom of the layout deck and linked to the turnout's throw bar via a vertical wire, it converts a manual snap-switch into a remotely operated, momentary-power turnout.\u003c\/p\u003e\u003cp\u003eTwo solenoid coils pull the throw rod in opposite directions; a brief 12–16 V AC pulse from a control box (such as Atlas #56 or any panel-mounted momentary switch) flips the points, and the coils relax so they do not overheat. Use one machine per turnout; group them onto a single control panel for yard or interlocking control. Compatible with Atlas Code 80 N scale and Code 83\/100 HO scale turnouts. The deluxe variant (#66) adds an integrated SPDT auxiliary contact for DCC frog power-routing or signal interlocks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO and N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 80 (N), Code 83 \/ 100 (HO)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Under-table twin-coil switch machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Remote, momentary 12–16 V AC pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Below table, vertical link to throw bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 65\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097378185398,"sku":"150-65","price":17.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bbf259c9-e2d8-4258-a341-cdb59fe652b3.jpg?v=1779570605"},{"product_id":"atlas-66-ho-n-scale-deluxe-under-table-switch-machine","title":"Atlas 66 HO \u0026 N Scale Deluxe Under-Table Switch Machine","description":"\u003cp\u003eAtlas 66 is the deluxe version of Atlas's under-table twin-coil switch machine. It performs the same job as the standard #65 — converting a snap-action turnout into a remotely operated, momentary-power switch — but adds an integrated SPDT auxiliary contact that closes in tandem with the points.\u003c\/p\u003e\u003cp\u003eThe SPDT contact is what makes this the modeller's choice for any layout that needs more than just remote throw. Wire it through the frog rail to power-route DCC frogs (eliminating dead-spots through the frog) or feed it to a signal-aspect logic block so a thrown turnout automatically drops the relevant signal to red. A brief 12–16 V AC pulse from a control box (such as Atlas #56) flips the points and the coils relax. Compatible with all Atlas Code 80 N and Code 83\/100 HO turnouts. For non-electrified installations the standard #65 saves money; for DCC frog power-routing or signalling, the #66 is the unit you want.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO and N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Deluxe under-table twin-coil switch machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Remote, momentary 12–16 V AC pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary contact:\u003c\/strong\u003e SPDT — for DCC frog power-routing or signal interlock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 66\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097378283702,"sku":"150-66","price":27.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_33ced6f7-8953-4e94-932e-a87384009da4.gif?v=1777554703"},{"product_id":"atlas-7-nine-n-scale-railroads-model-railroad-layout-plan-book","title":"Atlas 7 N Scale \"Nine Railroads\" Model Railroad Layout Plan Book","description":"\u003cp\u003eAtlas 7 — \"Nine N Scale Railroads\" — is Atlas's classic beginner-to-intermediate N scale layout plan book. Each of the nine layouts is presented with a colour overhead diagram, an isometric construction view, a complete Atlas parts list, and step-by-step wiring instructions, so a new modeller can budget the trackwork before cutting plywood.\u003c\/p\u003e\u003cp\u003eLayouts range from small loops on a 2×4 ft door right up to ambitious around-the-walls shelf railroads, covering the most common N scale benchwork sizes (the 2×4, 3×6, 4×8, 5×9 family). Wiring diagrams are written for DC block control but translate directly to DCC bus-and-feeder practice. Scenery, building placement, and paint guidance round out each plan. Pairs well with Atlas Code 80 N track packs and the Atlas N True-Track family for picking parts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Layout plan book — 9 plans, paperback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudience:\u003c\/strong\u003e Beginner to intermediate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 7\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097378873526,"sku":"150-7","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ffe62b21-0e8f-49b6-8d9b-c92e6353f803.jpg?v=1779570845"},{"product_id":"bachmann-39002-n-scale-ballast-spreader-for-n-hon30-new","title":"Bachmann 39002 N Scale Ballast Spreader For N\/HOn30","description":"\u003cp\u003eSpread ballast the easy way with this handy tool.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HOn30 (1:87 narrow gauge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog #:\u003c\/strong\u003e 39002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022899390024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":45098174775478,"sku":"161-39002","price":28.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_604533ab-073f-4bef-b1cb-c3810dc81df6.jpg?v=1777589728"},{"product_id":"bachmann-251-smoke-fluid-ompatible-for-all-smoking-locomotives","title":"Bachmann 251 Smoke Fluid for All Smoking Locomotives (4.5 oz)","description":"\u003cp\u003eBachmann smoke fluid for all HO, Large Scale, and Williams™ by Bachmann® smoke-equipped locomotives. Easy-to-use 4.5 oz dispenser with fine-tip applicator.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor use with all HO, Large Scale, and Williams™ by Bachmann® locomotives with smoke units\u003c\/li\u003e\n\u003cli\u003eEasy to use dispenser\u003c\/li\u003e\n\u003cli\u003e4.5 ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO (1:87)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog #:\u003c\/strong\u003e 00251\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022899002514\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":45098175889590,"sku":"161-251","price":22.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_66662fed-6277-4388-949f-df26ba48ef81.jpg?v=1779570366"},{"product_id":"bachmann-46720-n-scale-dual-road-crossing-gates","title":"Bachmann 46720 N Scale Dual Road Crossing Gates","description":"\u003cp\u003eYou can add sound, lights, and accent pieces to your railroad with our extensive selection of accessories.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog #:\u003c\/strong\u003e 46720\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022899467207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":45098241327286,"sku":"161-46720","price":19.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3c6b4327-6b54-43a5-8a67-8ea6a02ce305.jpg?v=1777592807"},{"product_id":"bowser-23-n-foam-locomotive-cradle-for-servicing-locomotives-and-cars-new","title":"Bowser 23 N Scale Foam Locomotive Cradle for Servicing Locomotives and Cars","description":"\u003cp\u003eThe Bowser 23 is a N scale rolling stock part. Genuine Bowser replacement \/ upgrade part for serious modellers.\u003c\/p\u003e\u003cp\u003eThe foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. #23 for N models 4\"w x 7 3\/4\"l\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Rolling Stock Part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bowser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 23\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bowser","offers":[{"title":"Default Title","offer_id":45098381410486,"sku":"006-23","price":15.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_8c635608-3f24-41e3-af5b-5235721d2a34.jpg?v=1777597582"},{"product_id":"bachmann-99981-conductive-contact-lube","title":"Bachmann 99981 All Scale Conductive Contact Lube","description":"\u003cp\u003eFor superior electric pickup, contact maintenance and track cleaning, the modeler's choice is E-Z Lube® Conductive Contact Lubricant.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog #:\u003c\/strong\u003e 99981\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022899999814\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.1 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":45098382033078,"sku":"161-99981","price":17.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a6264396-eac6-4c06-b043-478ab0da041c.jpg?v=1779570186"},{"product_id":"bachmann-99992-ez-lube-rail-road-track-cleaner","title":"Bachmann 99992 All Scale EZ-Lube Rail \u0026 Road Track Cleaner","description":"\u003cp\u003eClean your track and keep your trains and slot cars running great. Works great with hand-held Track cleaner Item No. 39013.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all model train scales and track systems\u003c\/li\u003e\n\u003cli\u003eAlso improves slot car track performance\u003c\/li\u003e\n\u003cli\u003eRemoves dirt and grime for better electric conductivity\u003c\/li\u003e\n\u003cli\u003e6 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog #:\u003c\/strong\u003e 99992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022899999920\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.7 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":45098382098614,"sku":"161-99992","price":19.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_4a761491-129d-4818-bec9-7e79117c69fc.jpg?v=1779570186"}],"url":"https:\/\/oakvillemodeltrains.com\/collections\/n-accessories-and-parts.oembed?page=9","provider":"Oakville Model Trains Depot","version":"1.0","type":"link"}