{"title":"DCC \u0026 Electronics","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDCC (Digital Command Control) is what makes modern model railroading run — independent control of multiple locomotives on the same track, realistic sound, prototypical lighting, and momentum that mimics real trains. Our DCC electronics collection covers every piece of the chain: decoders (for converting DC locomotives), sound decoders (for prototypical horns, bells, and prime-mover sounds), command stations (the brain of the system), boosters (for larger layouts), throttles, and decoder programmers.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eWe stock from the most trusted DCC manufacturers: Digitrax (Zephyr, DCS210, full Loconet ecosystem), NCE (PowerCab, PH-Pro, Cab06), ESU LokSound (industry-leading sound quality, custom sound projects), TCS (WowSound, T-Series motor decoders), and SoundTraxx (Tsunami2 sound decoders for steam, diesel and electric prototypes). For HO and N scale, we carry the right form factors — from 21-pin and 8-pin plug-and-play decoders to hardwire micro decoders for tight installs.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eNew to DCC? Start with a starter set (NCE PowerCab or Digitrax Zephyr) and a sound-equipped locomotive — that's a complete running system in two purchases. Already running DCC and looking to add sound? An ESU LokSound 5 or Tsunami2 decoder turns most modern locomotives into prototypical-sounding runners in under an hour.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eWant to see DCC-equipped locomotives ready to run? Browse our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"\/collections\/locomotives\"\u003elocomotives\u003c\/a\u003e collection — many are factory-equipped with DCC or DCC\/Sound. Have a question about decoder compatibility? \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e — we install decoders on customer locomotives and can recommend the right decoder for your specific model.\u003c\/p\u003e","products":[{"product_id":"atlas-2092-n-scale-code-55-terminal-joiners-power-feed-1-pair","title":"Atlas 2092 N Scale Code 55 Terminal Joiners \/ Power Feed - 1 Pair","description":"\u003cp\u003eThe Atlas #2092 is a pair of terminal joiners for Atlas N Code 55 track — rail joiners with a short wire feeder pre-attached, used to deliver power from a bus or pack to the rails without having to solder a feeder onto the rail web yourself.\u003c\/p\u003e\u003cp\u003e1 pair per pack (one for each rail). Pre-attached wire leads ready to connect to a controller, bus wire, or DCC booster output.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall one pair at the power-input point of each track block — slides in like a regular joiner.\u003c\/li\u003e\n\u003cli\u003eCrimp Atlas #201 spade connectors onto the wire ends for fast hookup at the controller or bus terminal.\u003c\/li\u003e\n\u003cli\u003eFor DCC operation, install multiple pairs every 6-8 feet of track to avoid voltage drop.\u003c\/li\u003e\n\u003cli\u003ePlug-and-play alternative to soldering feeders directly to the rail web.\u003c\/li\u003e\n\u003cli\u003eCompatible with all Atlas Code 55 N track and turnouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Terminal Joiners \/ Power Feed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2092\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862417078,"sku":"150-2092","price":6.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3b5499ae-b2f5-4772-8050-cb353e8ac060.jpg?v=1779570905"},{"product_id":"atlas-210-twin-control-switches-new","title":"Atlas 210 Twin Control Switches","description":"\u003cp\u003eThe Atlas #210 Twin is a classic Atlas wiring control unit — a pair of internally cross-wired DPDT (double-pole, double-throw) switches that gives you independent polarity control at two pairs of output terminals. Designed for cab control of reverse loops, wyes, turntables, and short reversing sections on DC-powered model railroads.\u003c\/p\u003e\u003cp\u003eThe Twin is part of Atlas's long-running Selector \/ Controller \/ Twin family of analog wiring blocks. Multiple Twins can be ganged together with the included double-edged jumper connectors — no extra wiring required between units. The screw-terminal housing accepts #3-48 screws and is fully compatible with Atlas spade-tongue solderless connectors for fast hookup.\u003c\/p\u003e\u003cp\u003eWhile the Twin is fundamentally a DC analog accessory, modellers running DCC frequently use it as a manual polarity switch on small reversing sections where an auto-reverser would be overkill.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Cab Control \/ Reverse-Loop Switch (Twin DPDT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Reverse loops · wyes · turntable polarity · double-track polarity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw + spade (Atlas #201 connectors recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouples with:\u003c\/strong\u003e Atlas #215 Selector, #220 Controller via included jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 210\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862482614,"sku":"150-210","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_09f4a68a-32bd-4b44-b912-1fca26731f67.png?v=1777495724"},{"product_id":"atlas-215-selector-control-switches-new","title":"Atlas 215 Selector Control Switches","description":"\u003cp\u003eThe Atlas #215 Selector is the classic Atlas 2-cab \/ 4-block wiring control unit — four single-pole, double-throw (SPDT) switches that let you independently route either of two cabs to any of four track blocks on a DC-powered model railroad.\u003c\/p\u003e\u003cp\u003eSelectors can be ganged together in any number with the included double-edged jumper connectors, expanding cab control to as many blocks as your layout requires; they can also be wired as area selectors for four-cab operation. Pair with the #220 Controller for reverse-loop, wye, and turntable polarity reversal.\u003c\/p\u003e\u003cp\u003eThe Selector remains one of the simplest, most reliable ways to wire up multi-cab DC operation — and many DCC modellers still use it for shop-track power isolation and progressive train staging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Cab \/ Block Selector (4× SPDT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabs \/ Blocks:\u003c\/strong\u003e 2-cab × 4-block per unit; ganged for more\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw + spade (Atlas #201 connectors recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouples with:\u003c\/strong\u003e Atlas #220 Controller, #210 Twin via included jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 215\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862548150,"sku":"150-215","price":17.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ea8c57b2-611c-433b-af47-adc70d0055ab.jpg?v=1777495729"},{"product_id":"atlas-220-controller-control-switches-new","title":"Atlas 220 Controller Control Switches","description":"\u003cp\u003eThe Atlas #220 Controller is the reversing companion to the #215 Selector — a wiring unit with two cab DPDT polarity reversers plus a switchable reverse-section block that either cab can take control of. The simplest way to wire and operate reverse loops, wyes, and turntables on a DC-powered cab-control layout.\u003c\/p\u003e\u003cp\u003eCouples directly with #215 Selectors (and with #210 Twins) using the included double-edged jumper connectors — no inter-unit wiring required. The two mainline reversers swap polarity of an entire cab feed; the reverse-section switch lets either cab take and reverse a tricky section without breaking train flow.\u003c\/p\u003e\u003cp\u003eLike all Atlas wiring components, the Controller predates DCC but remains the go-to manual reverse-loop solution where an automatic reverser isn't warranted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-Cab Polarity \/ Reverse-Section Controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e 2× DPDT cab polarity + 1× cab-selectable reverse section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw + spade (Atlas #201 connectors recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouples with:\u003c\/strong\u003e Atlas #210 Twin, #215 Selector via included jumpers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 220\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096862613686,"sku":"150-220","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_12f28756-8079-4d95-a764-8e22d8863f2a.jpg?v=1777495733"},{"product_id":"atlas-2539-n-scale-code-80-power-feed-terminal-rail-joiners-1-pair","title":"Atlas 2539 N Scale Code 80 Power Feed \/ Terminal Rail Joiners - 1 Pair","description":"\u003cp\u003eThe Atlas #2539 is a pair of Atlas N scale Code 80 terminal rail joiners — standard metal rail joiners with a short pre-soldered wire feeder, used to deliver power from a controller or DCC bus to the rails without having to solder a feeder onto the rail web yourself.\u003c\/p\u003e\u003cp\u003eSold 1 pair per pack (one for each rail). Pre-attached leads ready to crimp Atlas #201 spade connectors onto for fast hookup at the controller or bus terminal. For DCC operation, install multiple pairs every 6–8 feet of track to avoid voltage drop.\u003c\/p\u003e\u003cp\u003ePlug-and-play alternative to soldering feeders directly to the rail. Compatible with all Atlas N Code 80 Snap-Track, Super-Flex, and turnouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Terminal Joiners \/ Power Feed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair \/ pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 2539\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096864678070,"sku":"150-2539","price":7.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_6aa2bf05-5f12-499c-b0c3-36d86f0fd1c3.jpg?v=1777495854"},{"product_id":"atlas-2590-n-scale-left-remote-switch-machine","title":"Atlas 2590 N Scale Left Remote Switch Machine","description":"\u003cp\u003eThe Atlas #2590 is a left-hand remote switch machine for Atlas N Standard-Line turnouts — a separate AC twin-coil solenoid unit that mounts beside the turnout and pulls the points electrically when you press a control panel button. (Note: this is NOT a DCC accessory in itself; it's a conventional AC twin-coil solenoid. It can be driven by a DCC accessory decoder like the Digitrax DS64, but works out of the box with a standard AC accessory tap and momentary push-button.)\u003c\/p\u003e\u003cp\u003eWire the three machine leads — one common, two directional — to an Atlas #56 Controller or any momentary push-button setup that delivers a brief AC pulse (12-16V from your transformer's accessory tap). The switch machine is designed specifically for Atlas N Standard-Line turnouts — it bolts on to the tie strip and pulls the points via a small lever arm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower from a 12-16V AC accessory tap — do not use continuous DC, the coils will overheat.\u003c\/li\u003e\n\u003cli\u003eUse only momentary push-button control — Atlas #56 controller is the standard, or wire your own SPST momentary buttons.\u003c\/li\u003e\n\u003cli\u003eWire common to one terminal of the controller, the two directional leads to the throw and reverse buttons.\u003c\/li\u003e\n\u003cli\u003eTo convert a manual Atlas turnout to remote: remove the manual lever, screw on the #2590 (LH) or #2591 (RH) machine.\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (e.g. Digitrax DS64, NCE Switch-It) for digital control — wire the decoder's pulse outputs to the machine's three leads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2590\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096970715318,"sku":"150-2590","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bc7861ed-cf42-47ed-8bc8-b93705cfcfc0.jpg?v=1777508841"},{"product_id":"atlas-2591-n-scale-right-remote-switch-machine","title":"Atlas 2591 N Scale Right Remote Switch Machine","description":"\u003cp\u003eThe Atlas #2591 is the right-hand companion to the #2590 — an AC twin-coil remote switch machine for Atlas N Standard-Line right-hand turnouts. (Note: this is NOT a DCC accessory in itself despite the product category; it's a conventional AC twin-coil solenoid driven by an accessory-tap pulse. It can be controlled by a DCC accessory decoder like the Digitrax DS64.)\u003c\/p\u003e\u003cp\u003eWire the three leads — common plus two directional — to an Atlas #56 Controller or any momentary AC pulse source (12-16V from accessory tap). Bolts to the tie strip of any Atlas N Standard-Line right-hand turnout and pulls the points electrically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower from 12-16V AC accessory tap — never continuous DC (coils will burn out).\u003c\/li\u003e\n\u003cli\u003eUse only momentary push-button control — Atlas #56 controller standard, or build your own with SPST momentary buttons.\u003c\/li\u003e\n\u003cli\u003eWire common to one terminal of the controller, the two directional leads to throw\/reverse buttons.\u003c\/li\u003e\n\u003cli\u003ePair with #2590 for the left-hand version on facing-point yard ladders.\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (Digitrax DS64, NCE Switch-It) for digital layout control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2591\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096970813622,"sku":"150-2591","price":12.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ddf0f000-43c1-4c90-9dba-95d6cacb2aed.jpg?v=1777508846"},{"product_id":"atlas-2715-n-scale-code-80-lh-left-hand-remote-switch-machine-new","title":"Atlas 2715 N Scale Code 80 LH Left Hand Remote Switch Machine","description":"\u003cp\u003eThe Atlas #2715 is a left-hand standalone remote switch machine designed to screw onto Atlas N Code 80 #2700-series turnouts — converts manually-thrown turnouts (#2706, #2709) to remote operation, or replaces a damaged integrated machine on a remote turnout (#2704, #2708). (Note: this is NOT a DCC accessory in itself; it's a conventional AC twin-coil solenoid. It CAN be driven by a DCC accessory decoder like the Digitrax DS64, but works directly with AC accessory power.)\u003c\/p\u003e\u003cp\u003eTwin-coil AC solenoid (12-16V AC accessory tap, momentary pulse). Two screws attach the machine body to the turnout's tie strip, and a small lever arm engages the points throw bar. Wire the three leads (one common, two directional) to an Atlas #56 Controller or any momentary push-button setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScrew to the tie strip of an Atlas Code 80 #2706 (LH manual) or #2709 (Wye manual) turnout, replacing the manual lever.\u003c\/li\u003e\n\u003cli\u003eWire the three leads to an Atlas #56 Controller or any momentary AC pulse source.\u003c\/li\u003e\n\u003cli\u003ePower from 12-16V AC accessory tap — never continuous DC.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for #2700-series turnouts — won't fit #2750-series Custom-Line turnouts (use #65 under-table machine for Custom-Line).\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (Digitrax DS64, NCE Switch-It) for digital control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine (Standalone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Atlas #2700-series Code 80 turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2715\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096971305142,"sku":"150-2715","price":22.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_44a5ece1-0b86-42ff-bede-b327fd8a7406.jpg?v=1779570845"},{"product_id":"atlas-2716-n-scale-code-80-rh-right-hand-remote-switch-machine-new","title":"Atlas 2716 N Scale Code 80 RH Right Hand Remote Switch Machine","description":"\u003cp\u003eThe right-hand companion to the #2715 — a standalone AC twin-coil switch machine designed to screw onto Atlas N Code 80 #2700-series right-hand turnouts. Converts a manual #2707 to remote operation or replaces a damaged integrated machine on a #2705 remote turnout. (Note: this is NOT a DCC accessory in itself; it's an AC twin-coil solenoid that CAN be driven by a DCC accessory decoder.)\u003c\/p\u003e\u003cp\u003eTwin-coil AC solenoid (12-16V AC accessory tap, momentary pulse). Two screws attach to the turnout's tie strip; a lever arm engages the throw bar. Wire the three leads to an Atlas #56 Controller or any momentary push-button setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScrew to the tie strip of an Atlas Code 80 #2707 (RH manual) or #2709 (Wye manual) turnout, replacing the manual lever.\u003c\/li\u003e\n\u003cli\u003eWire the three leads to an Atlas #56 Controller or any momentary AC pulse source.\u003c\/li\u003e\n\u003cli\u003ePower from 12-16V AC accessory tap — never continuous DC.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for #2700-series turnouts; won't fit #2750-series Custom-Line.\u003c\/li\u003e\n\u003cli\u003eCan be driven by DCC accessory decoders (Digitrax DS64, NCE Switch-It).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e N (1:160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Twin-Coil Solenoid Switch Machine (Standalone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Atlas #2700-series Code 80 turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12-16V AC, momentary pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 2716\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096971370678,"sku":"150-2716","price":22.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bb8e7aa7-64b4-4666-a826-7a0346a6962b.jpg?v=1779570966"},{"product_id":"atlas-312-5-conductor-ribbon-wire-50-long","title":"Atlas 312 5-Conductor Ribbon Wire 50' Long","description":"\u003cp\u003eAtlas \u003cstrong\u003e#312\u003c\/strong\u003e is a 50-foot (15.2 m) \u003cstrong\u003e5-conductor ribbon-wire bundle\u003c\/strong\u003e — five individually insulated conductors fused side-by-side into a flat ribbon, the same wire Atlas supplies with its remote-control turnouts and Snap-Relay accessories. Buying a fresh roll lets you wire long runs without splicing and lets you keep your circuits color-coded as you go.\u003c\/p\u003e\u003cp\u003eUseful in any scale (HO, N, Z, S, O) and on any layout — DC, DCC, or AC accessory. Despite Shopify's category tag, this is general-purpose layout wire, not a DCC-specific product.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e50 ft total length — fan out one ribbon to several accessories without joining short pieces.\u003c\/li\u003e\n\u003cli\u003eRun alongside other Atlas turnout machines (#65 under-table, #80 above-table, Snap-Relay #200) where the factory-supplied harness is too short.\u003c\/li\u003e\n\u003cli\u003eStrip individual conductors with a 22 AWG \/ 24 AWG wire stripper; solder or insertion-crimp into your control panel terminals.\u003c\/li\u003e\n\u003cli\u003eColor-keyed conductors make it easy to track \"left coil \/ right coil \/ common \/ signal \/ accessory\" runs on a control panel.\u003c\/li\u003e\n\u003cli\u003eWorks at any voltage your layout needs — DC track power, DCC, or 12-16V AC accessory.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 5-conductor ribbon layout wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft (15.2 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Any scale \/ any layout (DC, DCC, AC accessory)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 312\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973500598,"sku":"150-312","price":50.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_1f43b355-57b0-4273-8a42-4d4dc2a83d29.jpg?v=1779571085"},{"product_id":"atlas-315-20-gauge-layout-wire-50-long-black","title":"Atlas 315 20 Gauge Layout Wire 50' Long - Black","description":"\u003cp\u003eAtlas \u003cstrong\u003e#315\u003c\/strong\u003e is a 50-foot reel of \u003cstrong\u003e20 AWG stranded layout wire in black\u003c\/strong\u003e — the workhorse single-conductor wire for bus runs, track feeds, and accessory wiring on model railroads. 20 AWG handles the current of any common-scale DC pack or DCC booster (5-10 A NMRA) with plenty of margin on a typical home layout.\u003c\/p\u003e\u003cp\u003eDespite Shopify's category tag, this is general-purpose model railroad wire, not a DCC-specific product. Works on any scale and any layout — DC, DCC, or AC accessory.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlack is the conventional color for one rail of the track bus (sometimes called \"outside rail\" or \"common\") — pair with red (#316) for the other rail.\u003c\/li\u003e\n\u003cli\u003eStrip with a 20 AWG \/ 18 AWG wire stripper; suitcase-connect, screw-terminal, or solder to track feeders.\u003c\/li\u003e\n\u003cli\u003e50 ft per reel — enough for a small-to-medium home layout's main bus runs.\u003c\/li\u003e\n\u003cli\u003eStranded conductor gives flexibility for routing through benchwork — fish through holes without kinking.\u003c\/li\u003e\n\u003cli\u003eColor-code consistently across the layout for sane troubleshooting: black for one polarity, red for the other.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 20 AWG stranded single-conductor layout wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Track bus, feeders, accessories (any scale, DC\/DCC\/AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973566134,"sku":"150-315","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_eb97ada6-7bcf-42f0-afba-e07287b24687.jpg?v=1779570725"},{"product_id":"atlas-316-20-gauge-layout-wire-50-long-red","title":"Atlas 316 20 Gauge Layout Wire 50' Long - Red","description":"\u003cp\u003eAtlas \u003cstrong\u003e#316\u003c\/strong\u003e is a 50-foot reel of \u003cstrong\u003e20 AWG stranded layout wire in red\u003c\/strong\u003e — the standard \"hot\" or \"inside rail\" color for the second leg of a model-railroad track bus. Use with black (#315) for a consistent two-color bus on any scale.\u003c\/p\u003e\u003cp\u003eGeneral-purpose layout wire — works on any scale, any layout type (DC, DCC, AC accessory). Not DCC-specific despite the store category tag.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRed is the conventional color for the second leg of the track bus, paired with black (#315).\u003c\/li\u003e\n\u003cli\u003e20 AWG handles common DCC booster currents (5-10 A) on home layouts with plenty of headroom.\u003c\/li\u003e\n\u003cli\u003eStrip, suitcase-connect, or solder to track feeders — stranded conductor flexes easily.\u003c\/li\u003e\n\u003cli\u003e50 ft reel — pair with #315 for a balanced two-color bus on a medium layout.\u003c\/li\u003e\n\u003cli\u003eAlso useful for AC accessory wiring runs that need to be visually distinct from track bus.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 20 AWG stranded single-conductor layout wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Track bus, feeders, accessories (any scale, DC\/DCC\/AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 316\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973631670,"sku":"150-316","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_08860e5b-6807-423a-b508-887f0b06ebec.jpg?v=1779570905"},{"product_id":"atlas-317-20-gauge-layout-wire-50-long-green","title":"Atlas 317 20 Gauge Layout Wire 50' Long - Green","description":"\u003cp\u003eAtlas \u003cstrong\u003e#317\u003c\/strong\u003e is a 50-foot reel of \u003cstrong\u003e20 AWG stranded layout wire in green\u003c\/strong\u003e — the conventional color for accessory grounds, signal commons, or any \"third color\" that needs to be visually distinct from track-bus black\/red. General-purpose model-railroad wire for any scale and any layout type.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreen is widely used for accessory commons, signal returns, switch-machine commons, or layout-ground.\u003c\/li\u003e\n\u003cli\u003e20 AWG handles DC pack, DCC booster, or 12-16V AC accessory current without warming up.\u003c\/li\u003e\n\u003cli\u003eStrip and solder, screw-terminal, or suitcase-connect.\u003c\/li\u003e\n\u003cli\u003e50 ft reel — enough for accessory wiring across a medium home layout.\u003c\/li\u003e\n\u003cli\u003eColor-code consistently across the layout: black (#315) for one rail, red (#316) for the other, green (#317) for accessory return — pure troubleshooting sanity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 20 AWG stranded single-conductor layout wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Accessory commons, signal returns, layout ground (any scale, DC\/DCC\/AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 317\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973762742,"sku":"150-317","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_95626b8f-bead-4442-b0e8-6610a74fddc6.jpg?v=1779571086"},{"product_id":"atlas-318-20-gauge-layout-wire-50-long-yellow","title":"Atlas 318 20 Gauge Layout Wire 50' Long - Yellow","description":"\u003cp\u003eAtlas \u003cstrong\u003e#318\u003c\/strong\u003e is a 50-foot reel of \u003cstrong\u003e20 AWG stranded layout wire in yellow\u003c\/strong\u003e — high-visibility color useful for signal-circuit hot legs, individual switch-machine coil leads, or any wiring run you want to spot instantly during troubleshooting. General-purpose model-railroad wire for any scale.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYellow is widely used for one of the two switch-machine coil leads (\"left coil\" or \"normal\" position), with another color for the opposing coil.\u003c\/li\u003e\n\u003cli\u003eAlso useful for signal-aspect circuits where each color denotes a specific aspect or block.\u003c\/li\u003e\n\u003cli\u003e20 AWG handles DC, DCC, or 12-16V AC accessory current with margin.\u003c\/li\u003e\n\u003cli\u003e50 ft reel — enough for several full switch-machine harness runs on a medium layout.\u003c\/li\u003e\n\u003cli\u003eColor-code consistently with the rest of the Atlas wire family: black\/red track bus, green accessory return, yellow\/blue switch coils.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 20 AWG stranded single-conductor layout wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Switch-machine coils, signal circuits, high-visibility runs (any scale, DC\/DCC\/AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 318\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973861046,"sku":"150-318","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_12cda29d-472a-4001-b7cb-49a9471637cc.jpg?v=1779571026"},{"product_id":"atlas-319-20-gauge-layout-wire-50-long-blue","title":"Atlas 319 20 Gauge Layout Wire 50' Long - Blue","description":"\u003cp\u003eAtlas \u003cstrong\u003e#319\u003c\/strong\u003e is a 50-foot reel of \u003cstrong\u003e20 AWG stranded layout wire in blue\u003c\/strong\u003e — typically the second switch-machine coil color (paired with yellow #318) or used as a distinct fourth color for advanced wiring like block detection, signal feeds, or detection-bus runs. General-purpose model-railroad wire for any scale.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlue is the conventional partner of yellow (#318) for the opposite switch-machine coil — \"right coil\" \/ \"reverse\" position.\u003c\/li\u003e\n\u003cli\u003eAlso widely used for block-detection runs, RailCom feedback, or signal aspect feeds.\u003c\/li\u003e\n\u003cli\u003e20 AWG handles DC, DCC, or 12-16V AC accessory current with margin.\u003c\/li\u003e\n\u003cli\u003e50 ft reel — enough for a complete switch-machine harness or block-detection bus on a medium layout.\u003c\/li\u003e\n\u003cli\u003eBuild a consistent color scheme across the layout: black\/red track bus (#315\/#316), green accessory return (#317), yellow\/blue switch coils (#318\/#319).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 20 AWG stranded single-conductor layout wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Switch-machine coils, block detection, signal feeds (any scale, DC\/DCC\/AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 319\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45096973926582,"sku":"150-319","price":16.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_607e5652-d646-476c-80bd-f6ca58767a27.png?v=1777509019"},{"product_id":"atlas-52-ho-scale-code-100-lh-left-hand-remote-switch-machine","title":"Atlas 52 HO Scale Code 100 Left Hand Remote Snap-Switch Turnout","description":"\u003cp\u003eThe Atlas \u003cstrong\u003e52\u003c\/strong\u003e is an HO scale \u003cstrong\u003eLeft Hand remote-actuated snap-switch turnout\u003c\/strong\u003e in the Atlas Code 100 sectional line. A low-profile twin-coil switch motor is built into the turnout base; activate it with a momentary 16V AC pulse via the Atlas Selector, Snap-Relay, or any compatible accessory controller. The diverging route uses Atlas's standard snap geometry — equivalent to an 18″ radius curve — so it drops directly into any standard Atlas Code 100 sectional layout.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in low-profile 16V AC twin-coil switch motor\u003c\/li\u003e\n\u003cli\u003eCode 100 nickel-silver rail on simulated brown wood ties\u003c\/li\u003e\n\u003cli\u003ePower-routing frog\u003c\/li\u003e\n\u003cli\u003eNMRA wheel-flange profile\u003c\/li\u003e\n\u003cli\u003eDrop-in compatible with all Atlas Code 100 sectional pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Snap-Switch Turnout (powered)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Remote (16V AC pulse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiverging radius:\u003c\/strong\u003e 18″ (Atlas standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 52\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDrive multiple turnouts from a single button via the Atlas Snap-Relay accessory. Compare with the Code 83 True-Track equivalents \u003cstrong\u003e#480\u003c\/strong\u003e\/\u003cstrong\u003e#481\u003c\/strong\u003e (powered, with integrated roadbed) and Code 83 Custom-Line \u003cstrong\u003e#505\u003c\/strong\u003e\/\u003cstrong\u003e#506\u003c\/strong\u003e #6 turnouts for main-line use.\u003c\/p\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097017311414,"sku":"150-52","price":19.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_9bd3e0fe-e6cb-4ef3-ab74-e3faf891e618.jpg?v=1779571085"},{"product_id":"atlas-53-ho-scale-code-100-rh-right-hand-remote-switch-machine","title":"Atlas 53 HO Scale Code 100 RH Right Hand Remote Switch Machine","description":"\u003cp\u003eThe Atlas 53 is an HO Code 100 right-hand remote switch machine — the under-table-or-side-mount solenoid that converts an Atlas Code 100 manual snap-switch (or rebuilds a damaged switch motor) into an electrically-thrown, panel-controllable turnout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works.\u003c\/strong\u003e A twin-coil solenoid drive sits beside or below the turnout, mechanically linked to the throwbar. Wired to a momentary toggle or a Cab Control Box (Atlas 56) at your operator panel, a short pulse on either coil throws the points in the chosen direction. Designed for DC or DCC layouts — the switch machine itself is electrically agnostic; you simply choose how you wire the throw button. Compatible with Atlas Cab Control Box (56), Connector (57), and Selector (215) panel hardware so you can build a coherent control panel as your layout grows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor 18\" Snap-Switches.\u003c\/strong\u003e This is the right-hand mate to the Atlas 52 left-hand remote machine. Both are designed for the 18\" radius diverging leg of Atlas Code 100 Snap-Switches and matched-geometry replacements. The Code 100 platform is the older, slightly taller railhead that still anchors many starter sets and legacy layouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail Code:\u003c\/strong\u003e Code 100 (Snap-Switch compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Remote Switch Machine, Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Twin-coil solenoid, momentary actuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 16V AC accessory (typical), DC or DCC layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 53\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 52\u003c\/strong\u003e — Code 100 LH Remote Switch Machine (matching pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 56\u003c\/strong\u003e — Cab Control Box, panel toggles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 57\u003c\/strong\u003e — Connector, wiring distribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 215\u003c\/strong\u003e — Selector, block-control switching\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097018589366,"sku":"150-53","price":19.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_6a05015f-3627-45d2-9163-7e1c047c20d6.jpg?v=1779570605"},{"product_id":"atlas-56-all-scale-switch-control-box","title":"Atlas 56 All Scale Switch Control Box","description":"\u003cp\u003eThe Atlas 56 is an all-scale \u003cstrong\u003eSwitch Control Box\u003c\/strong\u003e — a panel-mountable SPDT momentary toggle for controlling twin-coil switch machines (Atlas or any compatible brand). The standard way to bring turnout control to your fascia or control panel without building custom toggle wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works.\u003c\/strong\u003e Each box contains one SPDT (single-pole double-throw) momentary toggle: press in either direction to send a short pulse to one coil of the twin-coil switch machine, throwing the turnout. The toggle's resting position indicates which way the switch is currently set — a built-in visual feedback. Boxes are designed to couple together side-by-side in any number to build a wider control panel, no wiring between them needed. Includes labels so you can mark each toggle with the turnout it controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls.\u003c\/strong\u003e Atlas Snap-Switch remote machines (built into #540\/541\/542\/546), Atlas standalone remote machines (#52\/53\/65\/66\/584\/585), and any twin-coil solenoid switch machine of compatible voltage. Refer to Atlas's Wiring Book for the standard wiring diagram with AC accessory power.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e All\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Control Box (SPDT momentary toggle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Twin-coil switch machines (Atlas + 3rd-party)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Atlas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU \/ Item Number:\u003c\/strong\u003e 56\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 52\/53\u003c\/strong\u003e — Code 100 LH\/RH remote switch machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 584\/585\u003c\/strong\u003e — Code 83 LH\/RH remote switch machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 540\/541\/546\u003c\/strong\u003e — Snap-Switch remote turnouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtlas 55\u003c\/strong\u003e — plastic insulated rail joiners for block boundaries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45097021079734,"sku":"150-56","price":9.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_b5a32f3a-2f92-40d3-ac3d-4c2d363669d1.png?v=1779570546"},{"product_id":"atlas-840-ho-scale-code-100-nickel-silver-9-straight-terminal-track","title":"Atlas 840 HO Scale Code 100 9\" Straight Terminal Track","description":"\u003cp\u003eThe \u003cstrong\u003eAtlas 840\u003c\/strong\u003e is a 9′′ (228 mm) Code 100 straight Snap-Track section with factory-wired feeder leads — the standard track-power entry point on any Atlas Snap-Track layout. Two pre-soldered wires drop through the roadbed to the power pack or DCC bus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works:\u003c\/strong\u003e The two feeder wires connect to the screw terminals of an Atlas 313 Selector or an MRC\/Bachmann\/NCE\/Digitrax controller. One #840 powers a complete continuous loop; for larger layouts add additional feeders every 6 ft \/ 2 m to prevent voltage drop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode:\u003c\/strong\u003e 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9′′ \/ 228 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeeders:\u003c\/strong\u003e Pre-soldered, ~6′′ lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e DC and DCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with:\u003c\/strong\u003e Atlas 845 curved terminal, 313 Selector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 150-840\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45098167304374,"sku":"150-840","price":10.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_cbf59330-d096-4547-8db1-f8b4002938ec.jpg?v=1777588229"},{"product_id":"atlas-842-ho-scale-code-100-terminal-joiners-1-pair","title":"Atlas 842 HO Scale Code 100 Terminal Rail Joiners with Feeder Wires - 1 Pair","description":"\u003cp\u003eThe \u003cstrong\u003eAtlas 842\u003c\/strong\u003e is a pair of HO Code 100 metal rail joiners with pre-soldered feeder wires attached — the standard way to add power feeders anywhere on an existing Atlas Snap-Track layout without buying another terminal track section (#840).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works:\u003c\/strong\u003e Slip the joiners over rail ends in place of standard joiners; the feeder wires (~6′′ lead) drop through the roadbed to your power bus. Each pair handles one electrical block; on larger DCC layouts, drop feeders every 6 ft \/ 2 m to maintain clean signal.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode:\u003c\/strong\u003e 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCount:\u003c\/strong\u003e 1 pair (both rails)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeeders:\u003c\/strong\u003e Pre-soldered to the joiner body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e DC and DCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 150-842\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45098167369910,"sku":"150-842","price":6.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a3385b57-030b-4edf-84e0-3c290b7082a3.jpg?v=1777588236"},{"product_id":"atlas-845-ho-code-100-nickel-silver-18-radius-curve-terminal-track-1pc","title":"Atlas 845 HO Scale Code 100 18\" Radius Curved Terminal Track","description":"\u003cp\u003eThe \u003cstrong\u003eAtlas 845\u003c\/strong\u003e is an 18′′ radius Code 100 curved Snap-Track section with factory-wired feeder leads — the curved equivalent of the #840 straight terminal, used to feed power into a loop where the only accessible track is on a curve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits:\u003c\/strong\u003e Drop into any 18′′R curve location on the layout; the two pre-soldered wires drop through roadbed to a power pack or DCC bus. One terminal feeds a complete loop; add additional feeders every 6 ft \/ 2 m on larger layouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e HO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode:\u003c\/strong\u003e 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 18′′ \/ 457 mm, 30° arc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeeders:\u003c\/strong\u003e Pre-soldered, ~6′′ lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with:\u003c\/strong\u003e Atlas 840 straight terminal, 833 curves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 150-845\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":45098167599286,"sku":"150-845","price":11.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_f7267946-dcfc-445f-a3e1-995c184a9899.jpg?v=1779570485"},{"product_id":"bachmann-44949-all-scale-e-z-track-dcc-control-box-with-turnout-decoder","title":"Bachmann 44949 All Scale E-Z Track DCC Control Box with Turnout Decoder","description":"\u003cp\u003eThis control box with turnout decoder allows you to upgrade your electrically operated analog turnouts to DCC quickly and easily. To upgrade, simply replace your analog switch box with this decoder-equipped control box. Once connected, you can assign a decoder address and operate the turnout through your DCC system. Compatible with N, HO, On30, and O scales.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrades electrically operated analog turnouts to DCC\u003c\/li\u003e\n\u003cli\u003eCompatible with N, HO, On30, and O scales\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog #:\u003c\/strong\u003e 44949\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022899449494\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.4 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":45098241228982,"sku":"161-44949","price":47.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_7dfdeb24-9c41-42fb-8c52-dbe3732976ec.jpg?v=1779570186"},{"product_id":"bowser-1290-ho-scale-speaker-enclosure-for-2-sugar-cube-speakers-2-sets-new","title":"Bowser 1290 HO Scale Speaker Enclosure for 2 Sugar Cube Speakers (2 Sets)","description":"\u003cp\u003eThe \u003cstrong\u003eBowser 1290\u003c\/strong\u003e is a Speaker Enclosure for 2 Sugar Cube Speakers (2 Sets) for DCC sound-decoder installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Plastic speaker enclosure (baffle) designed to house two sugar cube speakers. Includes 2 enclosure sets per pack. Box may be glued to the loco shell or chassis for a permanent install. A proper enclosure dramatically improves bass response by preventing acoustic short-circuit between the speaker's front and back faces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 enclosure sets per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor speakers:\u003c\/strong\u003e Sugar cube speakers (standard 11×15 mm format)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Glue to loco shell or chassis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Moulded plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowser SKU:\u003c\/strong\u003e 1290 (Walthers 006-1290)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Sugar-cube speakers benefit dramatically from a proper enclosure — without a sealed back, the bass response collapses. Match the speaker to its matching enclosure for the best audio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Bowser Manufacturing:\u003c\/strong\u003e US-based manufacturer of HO scale model trains, parts, and DCC accessories (Lewistown, PA). In addition to its well-known locomotive and rolling-stock lines, Bowser offers a range of high-quality \u003cstrong\u003esugar cube speakers\u003c\/strong\u003e and enclosures for DCC sound installations — compatible with all NMRA-spec sound decoders (SoundTraxx, Digitrax, ESU, TCS, NCE).\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Bowser","offers":[{"title":"Default Title","offer_id":45098381115574,"sku":"006-1290","price":11.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_554b71e4-2bad-4671-b551-fbfcb7ae665a.jpg?v=1777597563"},{"product_id":"bowser-1291-ho-scale-dual-sugar-cube-speaker-with-wire-plug-new","title":"Bowser 1291 HO Scale Dual Sugar Cube Speaker with Wire Plug (16.4 × 35.25 × 9.5 mm)","description":"\u003cp\u003eThe \u003cstrong\u003eBowser 1291\u003c\/strong\u003e is a Dual Sugar Cube Speaker with Wire Plug (16.4 × 35.25 × 9.5 mm) for DCC sound-decoder installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Pre-assembled dual sugar cube speaker module — two 11×15 mm sugar cube drivers in one slim package, with a wire plug for clean connection to any DCC sound decoder. Overall dimensions 16.4 × 35.25 × 9.5 mm — fits easily in most HO diesel hood units and steam tenders.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker type:\u003c\/strong\u003e Dual sugar cube (2 × 11×15 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 16.4 × 35.25 × 9.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired:\u003c\/strong\u003e With factory wire plug for easy connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All NMRA sound decoders (SoundTraxx, Digitrax, ESU, TCS, NCE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowser SKU:\u003c\/strong\u003e 1291 (Walthers 006-1291)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Sugar-cube speakers benefit dramatically from a proper enclosure — without a sealed back, the bass response collapses. Match the speaker to its matching enclosure for the best audio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Bowser Manufacturing:\u003c\/strong\u003e US-based manufacturer of HO scale model trains, parts, and DCC accessories (Lewistown, PA). In addition to its well-known locomotive and rolling-stock lines, Bowser offers a range of high-quality \u003cstrong\u003esugar cube speakers\u003c\/strong\u003e and enclosures for DCC sound installations — compatible with all NMRA-spec sound decoders (SoundTraxx, Digitrax, ESU, TCS, NCE).\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Bowser","offers":[{"title":"Default Title","offer_id":45098381181110,"sku":"006-1291","price":20.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_e500cf4b-1ce8-43ff-a25f-6080ee5c55e8.png?v=1777597568"},{"product_id":"bowser-1294-ho-scale-dual-cube-sugar-speaker-with-wires-new","title":"Bowser 1294 HO Scale Dual Sugar Cube Speaker with Wires (17.5 × 25.5 × 6.7 mm — Low-Hood Diesel)","description":"\u003cp\u003eThe \u003cstrong\u003eBowser 1294\u003c\/strong\u003e is a Dual Sugar Cube Speaker with Wires (17.5 × 25.5 × 6.7 mm — Low-Hood Diesel) for DCC sound-decoder installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Pre-wired dual sugar cube speaker — two drivers in a 17.5 × 25.5 × 6.7 mm package optimised for \u003cstrong\u003elow-hood diesel\u003c\/strong\u003e installs (the shallow 6.7 mm depth fits where deeper speakers won't). Great for HO diesel hood units, switchers, and narrow shells.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker type:\u003c\/strong\u003e Dual sugar cube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 17.5 × 25.5 × 6.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired:\u003c\/strong\u003e Pre-wired, no plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e Low-hood diesel installs (shallow 6.7 mm depth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All NMRA sound decoders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowser SKU:\u003c\/strong\u003e 1294 (Walthers 006-1294)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Sugar-cube speakers benefit dramatically from a proper enclosure — without a sealed back, the bass response collapses. Match the speaker to its matching enclosure for the best audio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Bowser Manufacturing:\u003c\/strong\u003e US-based manufacturer of HO scale model trains, parts, and DCC accessories (Lewistown, PA). In addition to its well-known locomotive and rolling-stock lines, Bowser offers a range of high-quality \u003cstrong\u003esugar cube speakers\u003c\/strong\u003e and enclosures for DCC sound installations — compatible with all NMRA-spec sound decoders (SoundTraxx, Digitrax, ESU, TCS, NCE).\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Bowser","offers":[{"title":"Default Title","offer_id":45098381246646,"sku":"006-1294","price":20.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_74eef1bd-b843-4214-9c8d-93b7aba34ae9.png?v=1779570247"},{"product_id":"circuitron-1031-flw-1-white-strobe-lamp-1-4mm-1-3-1-5v-model-railroad-lighting","title":"Circuitron 1031 FLW-1 White Strobe Lamp (1.4mm Incandescent, 1.3–1.5V)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 1031 FLW-1 White Strobe Lamp\u003c\/strong\u003e is a complete micro-strobe assembly built around a 1.4 mm white incandescent bulb — for prototype-correct flash lighting on locomotives, towers, and emergency vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e A small driver circuit fires a 1.4 mm incandescent bulb (included) in a sharp strobe flash. Same physical size as the FL-1, but with the brighter white-strobe behaviour seen on modern locomotives and tower beacons.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb included:\u003c\/strong\u003e 1.4 mm incandescent, 1.3–1.5 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash colour:\u003c\/strong\u003e Bright white strobe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Battery or track-power adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Any scale — modern diesel hood-top strobes, water-tank warning lights, emergency-vehicle scenes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 1031 (Walthers 800-1031)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use with a Circuitron TP-2 \/ TP-3 track-power adapter (2002 \/ 2003) or any small 1.5 V DC source for clean operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098452746422,"sku":"800-1031","price":18.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_15458825-45ad-4bec-87fd-ea0c0075522f.png?v=1779570665"},{"product_id":"circuitron-1100-strobe-flasher-amtrak-style-new","title":"Circuitron 1100 Amtrak-Style Strobe Flasher Driver Circuit","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 1100 Strobe Flasher Amtrak Style\u003c\/strong\u003e is a flasher driver circuit that produces the distinctive twin-pulse \u003cstrong\u003eAmtrak-style strobe\u003c\/strong\u003e seen on AEM-7, F40PH, P40 \/ P42, GG1, and modern Amtrak F59PH \/ Sprinter ACS-64 locomotives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Generates the prototype Amtrak strobe pattern — two rapid pulses followed by a pause — for an LED or small incandescent bulb mounted in the loco shell.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash pattern:\u003c\/strong\u003e Amtrak twin-pulse strobe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives:\u003c\/strong\u003e Single LED or small incandescent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC (from PS-2 5302 or TP-2 \/ TP-3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Modern Amtrak passenger locomotive lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 1100 (Walthers 800-1100)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e LEDs require a series resistor — calculate for ~10 mA at your supply voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098453434550,"sku":"800-1100","price":18.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_697aa819-4e02-48e3-81d2-256a89dcaabf.png?v=1779571085"},{"product_id":"circuitron-1302-end-of-train-flasher-red-light-new","title":"Circuitron 1302 End-Of-Train (EOT) Flasher Red Light Driver","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 1302 End-Of-Train Flasher Red Light\u003c\/strong\u003e is a driver circuit that produces the prototype \u003cstrong\u003eEnd-Of-Train (EOT \/ FRED)\u003c\/strong\u003e red-flashing pattern for the last car of a freight train.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Drives a small red LED or 1.4 mm red incandescent at the prototype EOT flash rate, mimicking the FRED (Flashing Rear-End Device) seen on every modern North American freight train since the early 1980s.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash pattern:\u003c\/strong\u003e Prototype EOT slow-strobe red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives:\u003c\/strong\u003e Red LED or 1.4 mm red incandescent bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Battery or track-power adapter (TP-2 \/ TP-3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Caboose-replacement \/ FRED scenes on the last freight car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 1302 (Walthers 800-1302)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Pair with a Circuitron 1031 strobe driver on the locomotive for a complete prototype-correct train.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098455269558,"sku":"800-1302","price":23.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3d1a0b7e-6413-49c7-98ac-964ea35610c8.png?v=1779570006"},{"product_id":"circuitron-1400-ho-scale-dl-1-oscillating-ditch-lights","title":"Circuitron 1400 DL-1 Oscillating Ditch-Light Driver (HO)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 1400 HO Scale DL-1 Oscillating Ditch Lights\u003c\/strong\u003e is a complete \u003cstrong\u003editch-light oscillator\u003c\/strong\u003e driver — produces the alternating left-right flash pattern of modern diesel ditch lights, mandated on North American freight diesels since 1996.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Drives two LEDs (or two small bulbs) in the prototype ditch-light alternating pattern. Triggered by horn \/ function output or set to continuous oscillation. Used on every modern Class I road diesel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOscillation:\u003c\/strong\u003e Alternating left \/ right at prototype rate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives:\u003c\/strong\u003e 2 × LED or 2 × small incandescent (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC (use PS-2 5302 or TP-2 \/ TP-3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale fit:\u003c\/strong\u003e HO — circuit sized for typical HO loco shells\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 1400 (Walthers 800-1400)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Best wired to a DCC sound decoder's auxiliary function output so the ditch lights activate with the horn — exactly as the prototype works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098456219830,"sku":"800-1400","price":23.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_91221f84-3693-4a56-b8bb-0abd30786de5.png?v=1779570126"},{"product_id":"circuitron-2002-tp-2-track-power-adapter-new","title":"Circuitron 2002 TP-2 Track Power Adapter (Powers Circuits from Track Power)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 2002 TP-2 Track Power Adapter\u003c\/strong\u003e is a small bridge-rectifier \/ regulator module that lets you power any Circuitron lighting or accessory circuit directly from the layout's track power — no separate transformer required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Accepts AC, DC, or DCC track power on its input and produces a stable DC output suitable for lighting drivers (1031, 1100, 1302, 1400) and small accessory circuits. Simplifies wiring on small layouts and dioramas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e AC, DC, or DCC track power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Filtered DC for Circuitron lighting \/ flasher drivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Powering 1031, 1100, 1302, 1400, etc. from track power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 2002 (Walthers 800-2002)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098457137334,"sku":"800-2002","price":18.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_10263fa4-f178-47cb-b612-a286228a0e29.png?v=1777603297"},{"product_id":"circuitron-2003-tp-3-track-power-adapter-new","title":"Circuitron 2003 TP-3 Track Power Adapter (Higher Capacity)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 2003 TP-3 Track Power Adapter\u003c\/strong\u003e is a higher-capacity bridge-rectifier \/ regulator module — like the TP-2 but with more current headroom for driving multiple lighting circuits from track power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Accepts AC, DC, or DCC track power on its input and produces a stable DC output. Use when one TP-2 isn't enough — typically when you're running multiple ditch-light \/ strobe \/ EOT circuits off the same source.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e AC, DC, or DCC track power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Filtered DC (higher capacity vs. TP-2 2002)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Powering multiple Circuitron lighting \/ accessory circuits from one source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 2003 (Walthers 800-2003)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098458153142,"sku":"800-2003","price":21.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_886ba853-e9fb-4740-ac6a-56f6114d4ec8.jpg?v=1777603302"},{"product_id":"circuitron-5122-fl-2hd-heavy-duty-alternating-grade-crossing-flasher-new","title":"Circuitron 5122 FL-2HD Heavy-Duty Alternating Grade-Crossing Flasher (500 mA \/ Side)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5122 FL-2HD Heavy Duty Alternating Grade Crossing Flasher\u003c\/strong\u003e is the heavy-duty version of Circuitron's classic \u003cstrong\u003ealternating grade-crossing flasher\u003c\/strong\u003e — drives left-right crossbuck lights at the prototype flash rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Designed to be triggered by the output of any Circuitron grade-crossing detection circuit (DT-2 \/ DT-3). Heavy-duty output transistors raise the maximum load to \u003cstrong\u003e500 mA per side\u003c\/strong\u003e — recommended for boulevard crossing signals with multiple lights and for larger-scale signals (S, O, G) that draw more current. Can also be wired for continuous flashing or manual operation with a panel switch.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current:\u003c\/strong\u003e 500 mA per side (alternating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriggered by:\u003c\/strong\u003e Circuitron DT-2 (5202), DT-3 (5203), or any logic-level signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Boulevard \/ multi-light crossing signals and large-scale (O \/ G) crossings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModes:\u003c\/strong\u003e Detector-triggered, continuous, or panel-switch manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5122 (Walthers 800-5122)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e For standard HO \/ N two-bulb crossbucks, the lower-current FL-2 is usually enough. Use FL-2HD only if you've got multiple bulbs per side or higher-current LEDs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098461921462,"sku":"800-5122","price":27.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_e0ad9634-a4c9-4609-8422-7deb2516baa1.jpg?v=1777603307"},{"product_id":"circuitron-5202-dt-2-grade-crossing-detection-unit-w-full-logic","title":"Circuitron 5202 DT-2 Grade Crossing Detection (Full Logic, Bidirectional, 4 Opto-Sensors Included)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5202 DT-2 Grade Crossing Detection Unit w\/Full Logic\u003c\/strong\u003e is Circuitron's flagship \u003cstrong\u003ebidirectional grade-crossing detection circuit\u003c\/strong\u003e — built to duplicate prototype crossing behaviour for any train length from a single locomotive to a 100-car drag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Uses four \u003cstrong\u003eOpto-Sensors\u003c\/strong\u003e (included) embedded between the ties — two on each side of the crossing — to produce true prototype action: crossing flashers activate as the train approaches, remain active while the train occupies the crossing, and turn off only after the rear of the train clears. Works with AC, DC, or DCC track power. No modifications to rolling stock required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method:\u003c\/strong\u003e 4 × Opto-Sensors (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Fully bidirectional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrain length:\u003c\/strong\u003e Independent — handles 1 to 100+ cars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack power:\u003c\/strong\u003e AC \/ DC \/ DCC (any system)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Logic level — drives Circuitron flashers (FL-2 \/ FL-2HD), bell (BR-3), external relay (ER-1 \/ ER-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 10–18 V AC or DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5202 (Walthers 800-5202)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e The most prototype-accurate grade-crossing circuit on the market. Pair with FL-2HD (5122) for flashers and BR-3 (5703) for the recorded bell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098463101110,"sku":"800-5202","price":69.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_1512c817-15ca-4cf7-a18b-5531d17b704c.png?v=1779570246"},{"product_id":"circuitron-5203-dt-3-grade-crossing-detector-single-direction","title":"Circuitron 5203 DT-3 Single-Direction Grade Crossing Detector (Opto-Sensor Based)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5203 DT-3 Grade Crossing Detector Single Direction\u003c\/strong\u003e is a \u003cstrong\u003esingle-direction grade-crossing detection circuit\u003c\/strong\u003e — Circuitron's value-priced version of the DT-2 for one-way mainline situations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Uses proven OptoElectronic detection (Opto-Sensors mounted between the ties) to produce accurate grade-crossing action for any train length — from a single locomotive to a 100-car train — when the train approaches from one defined direction. No rolling-stock modifications. Works with AC, DC, or DCC; any scale.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method:\u003c\/strong\u003e OptoElectronic (Opto-Sensors required, sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirection:\u003c\/strong\u003e Single direction (use DT-2 for bidirectional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrain length:\u003c\/strong\u003e Independent — 1 to 100+ cars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack power:\u003c\/strong\u003e AC \/ DC \/ DCC (any system)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 10–18 V AC or DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Controls Circuitron flashers, BR-3 bell, external relays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5203 (Walthers 800-5203)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Step up to the DT-2 (5202) if your crossing sees traffic in both directions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098464215222,"sku":"800-5203","price":32.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3e36a35d-5c41-461f-b9c8-89b2da34123a.jpg?v=1777603317"},{"product_id":"circuitron-5204-dt-4-rolling-stock-detector","title":"Circuitron 5204 DT-4 Rolling Stock Detector (Photocell-Based)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5204 DT-4 Rolling Stock Detector\u003c\/strong\u003e is a \u003cstrong\u003esimple photocell-based detection circuit\u003c\/strong\u003e — triggers an output whenever a piece of rolling stock passes over (or sits on) the sensor location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Uses an Opto-Sensor \/ photocell between the ties to detect anything that blocks the ambient light — locomotives, cars, even an out-of-track derailment. Outputs a logic-level signal that can drive Circuitron flashers, the BR-3 bell, relays, or trigger automation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method:\u003c\/strong\u003e Photocell \/ Opto-Sensor (between-ties)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Logic-level — drives flashers, bells, relays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Industrial-spot detection, hidden-track occupancy, simple yard-arrival triggers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5204 (Walthers 800-5204)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Cheaper than the DT-2 \/ DT-3 for situations where you just need to know 'something is there' — but doesn't include the direction \/ train-length logic of a real grade-crossing controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098465198262,"sku":"800-5204","price":70.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_bd2ebd2c-64e9-405f-91d5-87c751060497.jpg?v=1779570065"},{"product_id":"circuitron-5302-ps-2-18v-ac-to-12v-dc-1-amp-regulated-power-supply","title":"Circuitron 5302 PS-2 Regulated Power Supply (18V AC → 12V DC, 1A)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5302 PS-2 18V AC to 12V DC 1 Amp Regulated Power Supply\u003c\/strong\u003e is a regulated bench-style power supply module that takes a standard 18 V AC layout-accessory transformer output and produces a clean 12 V DC, 1 A supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Provides clean regulated 12 V DC for all Circuitron detection, automation, and lighting circuits. Use one PS-2 to feed several boards from a single AC transformer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 18 V AC (standard layout accessory transformer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 12 V DC, regulated, 1 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Powering AR-1 \/ AR-2 \/ DT-2 \/ BD-2 \/ ER-1 \/ ER-2 \/ 5820 TL-1 etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5302 (Walthers 800-5302)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use one PS-2 per group of nearby circuits rather than running long DC wires from a single supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098466181302,"sku":"800-5302","price":25.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_2431cbc2-65d1-4777-867c-5710f3000f74.jpg?v=1777603326"},{"product_id":"circuitron-5400-ar-1-automatic-reverse-circuit","title":"Circuitron 5400 AR-1 Automatic Reverse Circuit (5A Relay, 12V DC, Opto-Sensor Triggered)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5400 AR-1 Automatic Reverse Circuit\u003c\/strong\u003e is an \u003cstrong\u003eautomatic train reversing circuit\u003c\/strong\u003e — flips the direction of DC track power whenever the Opto-Sensor is covered (or a pushbutton is pressed) for point-to-point automation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Changes track-power direction when the Opto-Sensor (sold separately) is covered by an approaching train. Perfect for test tracks, window displays, point-to-point mine trains, or automatic reverse-loop operation on small DC layouts. Pushbuttons may also be connected for manual reversing. 5 A capacity relay handles big locomotives.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e Opto-Sensor (covered) or external pushbutton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay rating:\u003c\/strong\u003e 5 A capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e 2 × 3 inch PCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e DC test track, window display, point-to-point automation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5400 (Walthers 800-5400)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e For DCC reverse loops, you want a true DCC autoreverser (e.g. Digitrax AR1 \/ NCE Auto-SW). The AR-1 is a DC track-power direction reverser, not a phase-flip module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098466934966,"sku":"800-5400","price":63.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_159d463a-b749-4e23-a739-fe818dc1c155.jpg?v=1779570185"},{"product_id":"circuitron-5401-ar-2-automatic-reverse-circuit-with-adjustable-delay","title":"Circuitron 5401 AR-2 Automatic Reverse Circuit with Adjustable Delay","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5401 AR-2 Automatic Reverse Circuit with Adjustable Delay\u003c\/strong\u003e is the \u003cstrong\u003eAR-1 with an added adjustable delay timer\u003c\/strong\u003e — train pauses at the end of each run before reversing, just like the prototype pulling up to a stop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Same auto-reverse function as the AR-1 (5400) but adds a user-adjustable delay between triggering and direction change. Adjustable from a few seconds to ~30+ seconds — long enough for a passenger train 'station stop' or a mine-load swap.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e Opto-Sensor (covered) or external pushbutton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay:\u003c\/strong\u003e User adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e DC point-to-point with realistic 'station stop' pause\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5401 (Walthers 800-5401)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use a long delay to simulate a freight-yard switching pause, or a short delay for continuous trolley-line back-and-forth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098468409526,"sku":"800-5401","price":76.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_a31224f3-8a53-45a3-9391-343cb5efa858.gif?v=1777603336"},{"product_id":"circuitron-5502-bd-2-current-sensing-block-occupancy-detector","title":"Circuitron 5502 BD-2 Current-Sensing Block Occupancy Detector (2-Color Signal Output)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5502 BD-2 Current Sensing Block Occupancy Detector\u003c\/strong\u003e is a \u003cstrong\u003ecurrent-sensing block-occupancy detector\u003c\/strong\u003e — provides a Red \/ Green signal output for a single isolated block of track.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Detects the current drawn by a locomotive or any lighted piece of rolling stock in an isolated block. Drives Red \/ Green LEDs (for 2-aspect signals) directly. Works with common-rail wired AC or DC track power and with most Command Control (DCC) systems. State-of-the-art IC design for high sensitivity and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method:\u003c\/strong\u003e Current sensing (no track interruption)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 2-color (Red \/ Green) signal drivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack power:\u003c\/strong\u003e Common-rail AC \/ DC \/ DCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetects:\u003c\/strong\u003e Locomotives + any lighted rolling stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5502 (Walthers 800-5502)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e For trailing freight cars without lights, add a resistor wheel-set per car to keep the block flagged as occupied even when the loco has left.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098469523638,"sku":"800-5502","price":26.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_7d6721e7-ab18-4689-9bc0-4b7937b902f3.jpg?v=1777603342"},{"product_id":"circuitron-5521-bd-1hd-block-occupancy-detector","title":"Circuitron 5521 BD-1HD Heavy-Duty Block Occupancy Detector","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5521 BD-1HD Block Occupancy Detector\u003c\/strong\u003e is a \u003cstrong\u003eheavy-duty current-sensing single-output block detector\u003c\/strong\u003e — like the BD-1 but with higher current capacity for layouts with multiple sound-equipped locomotives in a block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Provides one logic-level occupancy output for an isolated block. Higher current rating than the standard BD-1 — handles the larger combined current of multiple modern sound-equipped diesels without saturating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method:\u003c\/strong\u003e Current sensing (heavy-duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Single logic-level occupancy signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Blocks that may hold multiple sound-equipped diesels simultaneously\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5521 (Walthers 800-5521)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098470637750,"sku":"800-5521","price":43.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_2c911b90-4dc5-46cd-bc35-2cfa1a0589bb.png?v=1779570785"},{"product_id":"circuitron-5522-bd-2hd-heavy-duty-block-detector","title":"Circuitron 5522 BD-2HD Heavy-Duty Block Occupancy Detector (2-Color Signal Output)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5522 BD-2HD Heavy Duty Block Detector\u003c\/strong\u003e is the \u003cstrong\u003eheavy-duty version of the BD-2\u003c\/strong\u003e — current-sensing block detector with Red \/ Green signal-driver outputs for higher-current blocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Same Red \/ Green 2-aspect signal-driving capability as the BD-2, but with beefier output transistors for situations where the block may hold multiple sound-equipped locos or many lighted passenger cars. Works with common-rail AC \/ DC \/ DCC.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method:\u003c\/strong\u003e Current sensing (heavy-duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 2-color (Red \/ Green) signal drivers — higher current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack power:\u003c\/strong\u003e Common-rail AC \/ DC \/ DCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5522 (Walthers 800-5522)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098472046774,"sku":"800-5522","price":39.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_4f857944-f52f-47d8-b0a4-e996ac6d04cf.jpg?v=1779570426"},{"product_id":"circuitron-5604-er-1-external-relay-with-spdt-relay","title":"Circuitron 5604 ER-1 External Relay Module (SPDT, 2A, 12V Coil)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5604 ER-1 External Relay with SPDT Relay\u003c\/strong\u003e is a small \u003cstrong\u003eSPDT (single-pole double-throw) relay driver module\u003c\/strong\u003e that interfaces directly with any Circuitron detection circuit output — for switching extra AC or DC loads (turnout machines, layout lighting, fans, etc.).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Provides a 2 A SPDT relay with all driver circuitry built in — can be connected straight to the output of any Circuitron Block Occupancy Detector, Grade Crossing Detector, or auto-reverser. Use the relay contacts for automatic train control (power-off on block ahead), layout-lighting automation, or to switch heavier loads than the detection circuit can drive directly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay type:\u003c\/strong\u003e SPDT (single-pole double-throw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact rating:\u003c\/strong\u003e 2 A (AC or DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e 12 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 11–14 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives from:\u003c\/strong\u003e Any Circuitron detection-circuit output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5604 (Walthers 800-5604)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098473455798,"sku":"800-5604","price":16.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_91f1dca5-ed92-4344-8b72-be95cf770b97.jpg?v=1779570065"},{"product_id":"circuitron-5606-tc-2-turnout-alternator-with-twin-coil","title":"Circuitron 5606 TC-2 Twin-Coil Turnout Alternator (Capacitor Discharge)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5606 TC-2 Turnout Alternator with Twin Coil\u003c\/strong\u003e is a \u003cstrong\u003ecapacitor-discharge twin-coil turnout driver\u003c\/strong\u003e — gives Atlas, Peco PL-10, Kemtron, and other twin-coil snap-action switch machines a reliable, repeatable throw without burning out the coils.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Charges a capacitor between throws and discharges it through the selected coil on command — produces full throw current for a fraction of a second, then disconnects. Eliminates the coil burnout that happens when a momentary switch sticks 'on'. Built-in alternating logic toggles between left \/ right with each press.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Twin-coil switch machines (Atlas, Peco PL-10, Kemtron, etc.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Capacitor discharge — coil-safe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic:\u003c\/strong\u003e Built-in alternating (single pushbutton toggles direction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5606 (Walthers 800-5606)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e For slow-motion stall-motor machines like the Tortoise \/ SMAIL, you don't need this — they run on continuous low-current DC and are inherently coil-safe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098474733750,"sku":"800-5606","price":37.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_18831b94-71b4-4060-9e4a-0bbcfaefe2a9.png?v=1779570546"},{"product_id":"circuitron-5624-er-2-external-relay-with-dpdt-relay","title":"Circuitron 5624 ER-2 External Relay Module (DPDT, 2A, 12V Coil)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5624 ER-2 External Relay with DPDT Relay\u003c\/strong\u003e is the \u003cstrong\u003eDPDT (double-pole double-throw) version of the ER-1\u003c\/strong\u003e — two independent switched circuits from one detection-circuit input.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Same driver circuitry as the ER-1 (5604) but with a DPDT relay — handy for any situation where one trigger needs to switch two separate loads simultaneously, or for direction-reversal of a DC supply (one pole per rail).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay type:\u003c\/strong\u003e DPDT (double-pole double-throw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact rating:\u003c\/strong\u003e 2 A (AC or DC) per pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e 12 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 11–14 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Two-circuit switching, DC reversing, dual-light layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5624 (Walthers 800-5624)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098475847862,"sku":"800-5624","price":20.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3b17e5c5-6414-496c-afd3-ee0123aa5884.png?v=1779570366"},{"product_id":"circuitron-5703-br-3-digitally-recorded-grade-crossing-bell-with-speaker","title":"Circuitron 5703 BR-3 Digitally Recorded Grade-Crossing Bell with Speaker","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5703 BR-3 Digitally Recorded Grade Crossing Bell with Speaker\u003c\/strong\u003e is a complete \u003cstrong\u003edigitally recorded grade-crossing bell sound module\u003c\/strong\u003e — speaker included — that adds prototype-accurate ringing-bell audio to any crossing scene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Plays back a digital recording of a real prototype crossing bell, triggered by any Circuitron grade-crossing detector (DT-2 \/ DT-3) or any other logic-level source. Speaker included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Digitally recorded prototype crossing bell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriggered by:\u003c\/strong\u003e DT-2 \/ DT-3 detection circuits or any logic-level signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC (from PS-2 5302 or any 12 V DC supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5703 (Walthers 800-5703)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Mount the speaker under the layout near the crossing, with a small port hole through the scenery for the most prototype-sounding result.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098476961974,"sku":"800-5703","price":47.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_3b5762a0-f3c5-47d8-a4fd-fa6eac64d069.jpg?v=1777603374"},{"product_id":"circuitron-5820-tl-1-traffic-light-controller","title":"Circuitron 5820 TL-1 Traffic Light Controller (4-Way Intersection Sequencer)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 5820 TL-1 Traffic Light Controller\u003c\/strong\u003e is a \u003cstrong\u003e4-way intersection traffic-light sequencer\u003c\/strong\u003e — drives all the LEDs for a complete prototype-correct stoplight intersection, with realistic timing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Outputs the standard 4-way prototype sequence (green \/ yellow \/ red, with cross-street complement) and drives LEDs for all four corners of a typical intersection. User-adjustable timing for the green \/ yellow \/ red phases.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives:\u003c\/strong\u003e Up to 12 LEDs (4 × red, 4 × yellow, 4 × green) for a 4-way intersection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSequence:\u003c\/strong\u003e Prototype green → yellow → red with cross-street complement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiming:\u003c\/strong\u003e User adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC (use PS-2 5302)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 5820 (Walthers 800-5820)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e LEDs not included — use any standard 3 mm or 5 mm LEDs with appropriate series resistors. Walthers, Tomar, and Miniatronics all sell scale traffic-light heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098478010550,"sku":"800-5820","price":57.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ce63d5a6-76e6-4763-9af9-9af51757c043.jpg?v=1779570126"},{"product_id":"circuitron-6200-smail-slow-motion-switch-machine-w-dcc","title":"Circuitron 6200 SMAIL Slow-Motion Switch Machine with Integrated DCC Decoder (Single)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 6200 SMAIL Slow Motion Switch Machine w\/ DCC\u003c\/strong\u003e is the \u003cstrong\u003eSMAIL — Slow-Motion Actuator with Integrated Logic\u003c\/strong\u003e. A Tortoise-style stall-motor switch machine with a built-in DCC stationary decoder (NCE Switch-It™ technology) — just two wires to the DCC bus and you're done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Same physical size and mounting as the iconic Tortoise, so you get the silky slow-motion throw and rock-solid point pressure modellers love — but with a built-in DCC accessory decoder. Two-wire connection to the DCC bus, no separate power supply needed. Works with any DCC system that supports accessory address control (NMRA or Digitrax signal modes). Can also be controlled by panel switches or detection circuits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Slow-motion stall-motor switch machine + integrated DCC decoder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Same as Tortoise (use template 6190)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDCC:\u003c\/strong\u003e 2-wire to DCC bus, no separate power supply needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoder:\u003c\/strong\u003e NCE Switch-It™ technology (enhanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux switches:\u003c\/strong\u003e Internal SPDT contacts, 2 A AC \/ DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso controllable by:\u003c\/strong\u003e Panel switches, detection circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 6200 (Walthers 800-6200)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e For non-DCC layouts or where you want to keep the decoder separate, use the plain Tortoise + a Switch-It \/ SMAIL Lite. Save 12-pack money with 6212 if you need 12 or more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098481615030,"sku":"800-6200","price":45.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_ee2f438f-d9ae-4ad0-a246-31e2772badab.jpg?v=1779571086"},{"product_id":"circuitron-6212-smail-switch-machine-dcc-decoder-equipped-12-pcs","title":"Circuitron 6212 SMAIL Slow-Motion Switch Machine 12-Pack (DCC Decoder Equipped)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 6212 SMAIL Switch Machine DCC Decoder Equipped 12 Pcs\u003c\/strong\u003e is a \u003cstrong\u003e12-pack of SMAIL slow-motion switch machines\u003c\/strong\u003e — same product as the 6200 single but at the bulk-pack price for medium-to-large layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Twelve SMAIL slow-motion stall-motor switch machines, each with a built-in DCC accessory decoder (NCE Switch-It™ technology). Two-wire connection to the DCC bus, no separate power supply needed. Same mounting footprint as the iconic Tortoise.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 12 SMAIL switch machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Slow-motion stall-motor + integrated DCC accessory decoder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Same as Tortoise (use template 6190)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDCC:\u003c\/strong\u003e 2-wire to DCC bus, no separate power supply needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux switches:\u003c\/strong\u003e Internal SPDT contacts, 2 A AC \/ DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 6212 (Walthers 800-6212)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Significant per-unit savings vs. buying twelve individual 6200 units. Worth it once you've committed to the SMAIL standard across the layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098482729142,"sku":"800-6212","price":579.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_45ef21a5-b5d2-40f4-8157-ac3b9611be52.jpg?v=1779571086"},{"product_id":"circuitron-6500-tortoise-replacement-parts-spring-wire-screws-fulcrum-6-sets","title":"Circuitron 6500 Tortoise Replacement Parts — Spring Wires + Screws + Fulcrums (6 sets)","description":"\u003cp\u003eThe \u003cstrong\u003eCircuitron 6500 Tortoise Replacement Parts Spring Wire\/Screws\/Fulcrum - 6 sets\u003c\/strong\u003e is a \u003cstrong\u003ecomplete Tortoise \/ SMAIL parts pack\u003c\/strong\u003e — 6 sets of spring wires, mounting screws, and fulcrums in one box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e All the small bits you need to install, repair, or convert six Tortoise \/ SMAIL switch machines. Spring wires take the bumps and slack out of the throwbar linkage; fulcrums set the lever ratio; screws mount the machine. Handy to have on the workbench whenever you're installing a batch of turnouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 sets (sufficient for 6 Tortoise \/ SMAIL installs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach set:\u003c\/strong\u003e Spring wire + mounting screws + fulcrum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Tortoise (6000) and SMAIL (6200 \/ 6212)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitron SKU:\u003c\/strong\u003e 6500 (Walthers 800-6500)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Circuitron:\u003c\/strong\u003e A USA-made model-railroad electronics specialist (Maryville, Illinois) founded in the 1970s. Famous for the industry-standard \u003cstrong\u003eTortoise\u003c\/strong\u003e slow-motion under-table switch machine and its surface-mount cousin the \u003cstrong\u003eSMAIL\u003c\/strong\u003e. The full range covers detection (block detectors, Opto-Sensor grade-crossing logic), automation (auto-reversers, external relays, twin-coil alternators), signal \/ lighting electronics (alternating flashers, ditch-light oscillators, strobe drivers), power supplies, and a complete set of Tortoise \/ SMAIL replacement parts plus the solderless \u003cstrong\u003eZipZ\u003c\/strong\u003e connection system. Most circuits work with AC, DC, or DCC track power unless specifically noted otherwise.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Circuitron","offers":[{"title":"Default Title","offer_id":45098483941558,"sku":"800-6500","price":11.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_c5611a2a-7a50-4f8a-ba6f-d04c42a2e757.jpg?v=1777603402"},{"product_id":"digitrax-db210-single-3-5-8-amp-autoreversing-dcc-booster-3-port","title":"Digitrax DB210 3\/5\/8 Amp Auto-Reversing DCC Booster (3-Port LocoNet)","description":"\u003cp\u003eThe \u003cstrong\u003eDigitrax DB210\u003c\/strong\u003e is the \u003cstrong\u003e3\/5\/8 Amp Auto-Reversing DCC Booster (no command station)\u003c\/strong\u003e — a DCC \u003cstrong\u003ebooster\u003c\/strong\u003e that takes the command station's logic signal and amplifies it into the high-current track signal that actually powers the rails. Add a booster when one command station can't supply enough current for a large layout, or when you want separate power districts to isolate short circuits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput: \u003cstrong\u003e3 \/ 5 \/ 8 amp\u003c\/strong\u003e selectable, up to 8A peak total\u003c\/li\u003e\n\u003cli\u003eAuto-reversing built in — handles reversing loops \/ wyes without external auto-reverser\u003c\/li\u003e\n\u003cli\u003eMulti-scale capable: N + HO + large scale with custom voltage trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocoNet plug-and-play\u003c\/strong\u003e — no dip-switch surgery, just plug in and configure via OPSW\u003c\/li\u003e\n\u003cli\u003eEasy dip-switch setup\u003c\/li\u003e\n\u003cli\u003eAuto-resetting over-temperature and short-circuit protection\u003c\/li\u003e\n\u003cli\u003eTrack status indicators on the front panel\u003c\/li\u003e\n\u003cli\u003eStabilized track drive output\u003c\/li\u003e\n\u003cli\u003eOver-voltage protected, IPL (in-place loader) firmware-updatable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-shutdown\u003c\/strong\u003e if command-control signal is lost — prevents runaway trains\u003c\/li\u003e\n\u003cli\u003ePairs with DCS210+ \/ DCS240+ command stations to add additional power districts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout LocoNet:\u003c\/strong\u003e LocoNet is Digitrax's two-way control network that connects throttles, boosters, command stations, detection blocks, and signal modules across a layout — using standard 6-conductor RJ12 telephone cable. The two-way communication is what enables advanced features like transponding (knowing which loco is where), real-time slot status, and CV read-back from anywhere on the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Digitrax:\u003c\/strong\u003e Digitrax is North America's leading manufacturer of DCC systems and has been the architect of the DCC standard since the 1990s. The proprietary \u003cstrong\u003eLocoNet\u003c\/strong\u003e control bus is the most widely-supported throttle and accessory interface in club layouts worldwide, and Digitrax decoders \/ boosters \/ command stations are fully NMRA DCC compliant and interoperable with all NMRA-compliant DCC equipment.\u003c\/p\u003e\u003cp\u003eIn stock at Oakville Model Trains Depot.\u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":45098511696054,"sku":"245-DB-DB210","price":188.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/files\/57_d8efbc4c-0645-4d3d-9824-b5c7a5c222ed.jpg?v=1779570066"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/5131\/1286\/collections\/a_digital_vector_icon_for_dcc_electronics_feat-7317753.png?v=1779564557","url":"https:\/\/oakvillemodeltrains.com\/collections\/dcc-electronics.oembed?page=6","provider":"Oakville Model Trains Depot","version":"1.0","type":"link"}